anonymous
28 February 2007
I've heard of plenty of people dumping their final mixes from the computer onto some reel-to-reel tape, then back onto the computer again.
Question:
If you have the tape machine inputs hooked up to your interface's stereo outs, can you simultaneously run the L&R outputs from the tape machine to 2 inputs back to your interface? Sort of a loop, I guess...Does the information need to be recorded to the tape first, or can you run it all at the same time?
Thanks!
Comments
Also do a search here, there's another thread on this. For best
Also do a search here, there's another thread on this.
For best results, make sure you are using a 1/2" tape machine running at least 15ips ( 30ips is prefered). For less noise, use a +9 tape.
If you use anything else, just be aware that the results will be inferior.
sure you can. But there will be a delay of a few millisecends i
sure you can. But there will be a delay of a few millisecends if you're porting-out to a 3-head machine.
So, you'll need to fix the offset later, when you're mixing in these new tracks.
You can also print-to an analog tape on a cheaper, two-head machine, but then you'll have to play back the tape into your computer after the fact, in real time. But beware, there will be drift that way, 'cause analog machines don't run with the same precision and sync-lock that digital does. They can get close with a syncronizer, but if it's just a 2-head machine, chances are they won't have that feature anyway.
Best to "print-through" a 3-head machine, playing it in real time.
For more info on this and a whole lot more, check out this month's Electronic Musician magazine (March 2007) and read the article endtitled: "Joining the Reel World".