So, I've had it with my resource-sucking Profire 26x26. My computer worked just fine with my E-MU system, but I needed more inputs. The Firestudio also hates my computer so I'm moving away from firewire altogether.
I have two PCI and one PCI-E slots in my Pentium-D VAIO. I was looking at the RME HDSP 9652. I love the idea of it! I already have one DIGIMAX FS that I LOVE, but I would really like to run two full DIGIMAX's at 88.2k. Are there any PCI systems out there that have four ADAT I/O's? The 9652 only has three. I have no problem spending some money here as I would just like to get something that is made for quality, like RME or higher. Suggestions? I know there is a lot on these forums about interfaces, etc, but none that I can see that offer the ADAT connectivity that I would like.
If not that, perhaps I should sell both my DIGIMAX and Profire and move to MADI? I suppose I should do some more research on that though.
Tags
Comments
Sorry to be a post-whore, but the more I see this thing the more
Sorry to be a post-whore, but the more I see this thing the more I'm drooling.
Just a flow of my signal as I'm seeing it right now. Let me know what you all think:
-2x Presonus DIGIMAX FS
-S/MUX out to RME HDSPe RayDAT
Now should I get the optional TEB TDIF expansion to keep my computer as the master time coder or should I just set it to slave and use one of my DIGIMAX's as the master via ADAT to the PC and BNC to the other DIGIMAX?
Will I notice any difference in CPU performance between using PC
Will I notice any difference in CPU performance between using PCI and PCIe?
No. The PCIe bus is much faster and can transmit more data at one time. That helps make it more stable and give it headroom if you will. The CPU is the CPU and all non outboard DSP will happen with it.
JesterMasque wrote: Wow, I'm in love..... This is what I've been
JesterMasque wrote: Wow, I'm in love.....
This is what I've been wanting for so long now! I've just been so dumb not to look into PCIe options.Will I notice any difference in CPU performance between using PCI and PCIe?
What is PCI Express? A Layman's guide to high speed PCI-E technology
http://www.directron.com/expressguide.html
The difference is that PCI and AGP are being replaced so PCIe stands to inherit the slot, so to speak.
Hey guys! Thanks so much for the replies!! I'm psyched about get
Hey guys! Thanks so much for the replies!! I'm psyched about getting this set-up now =D
Right now I'm doing the "unthinkable" and running two sound cards at once. My main system is the E-MU 1820m, but I switch on and off my Profire as needed for recording. It works alright.. I guess. Just a pain until I go RME.
Hi Vinnie, RME has the RayDat out which supports 4 ADT I/Os PLU
Hi Vinnie,
RME has the RayDat out which supports 4 ADT I/Os PLUS S/PDIF PLUS AES/EBU - 36 IN/OUT.
It needs a PCIe slot ...
So good luck with that
Manfred