anonymous
19 May 2001
Hey everyone,
I got the Behringer Eurorack MX 602A for my preamp. I guess this post is much like the one just before it. Wondering about gains on each board. I'm only using SM57's and have no other additions. Just SM57 to Behr. to VS 880.
Also, there are knobs for both level and gain. Wondering the difference on those. To me, I guess I understand gain, but I don't know why there is this level adjustment also.
Hope to hear back soon.
Sillyman
Hey Silly The post before this one is very relevant to your ques
Hey Silly
The post before this one is very relevant to your question so also have a look at that.
Basically you should try to keep the gain on the Roland as low as possible. Up the gain on the Behringer until it clips and then back it off a bit. Unfortunately it doesn't give you a PLF level so you have to use this method. Up the volume level on the "B" until you get an adequate level on the recorder. It should be pretty much that simple. If your levels are a bit up and down during the performance you might want to use a bit of compression. Not too much though (also see previous thread).
Good luck, I'm looking forward to hearing some results.
Mark