just got a little problem with battery 3 in Logic Pro which is really driving me mad.

I have set up battery as a multi instrument with battery options set to have 10 Stereo and 10 Mono outputs going to logic.

I have made 9 more stereo Aux channels accepting inputs 3/4 to 19/20 from battery which all work spot on and of course 1 more which is the standard stereo 1/2 which battery is running on for direct ouput.

I have then made anoter 10 Mono Aux channels for accepting outputs 21 through to 30 of battery and this is where I come into a little problem.

The aux channels are all sitting there ready but when I get to assisning them I cannot select past battery channel 24 on the aux channels so I have the next 6 to assign but in the list it only gives options for upto channel 24 of battery outs.

I am really confussed by this and am wondering if there is a simple way of being able to select these last 6 battery out for the aux channels.

hope this makes sense and somebody can shed some light .

thanks in advance guys