I'm going to build a multi purpose studio on 5 acres in a location where there is little outside noise to be overly concerned about. I'm in the country, on a very private lake where the sound of nature is actually something I would rather hear as a natural ambience (maybe I am onto something lol)!
Never the less, kidding aside... it's not like we have screaming city ambiance where I am living. Its very quiet here in comparison to a large city. So, isolating the outside from bleeding is far less of a concern for me but I would still like to discuss that as well.
NOTE: I have no idea what I want so I expect to evolve with it all as I gather all sorts of idea's from everyone. Thank you :)
Here we go...
What would the idea dimensions be to start with?
Thanks!
Topic Tags
Comments
The whole barn concept reminds me of the tv show 'live at daryls
The whole barn concept reminds me of the tv show 'live at daryls house' where one of the members from hall and oats has fellow mucisians over to his barn at his house which is all set up to jam.
I love the idea that a studio doesn't look like a studio. I'm going to disguise mine as a living room lol.
The amount of amazing recordings done in houses, mansions, and other non-purpose built rooms is really amazing. Particularly for tracking, but since critical decisions are made at tracking they made the monitoring work.
I know in this case tracking is somewhat secondary, but a barn type structure, or anything really even with ground level is a life saver for loads ins. Especially if you have a nice wide set of doors.
audiokid, post: 448025, member: 1 wrote: Hey Marco, I've thought
audiokid, post: 448025, member: 1 wrote: Hey Marco, I've thought about those big steel building but steel... It woul be cheaper though.
The posts and beams looks beautiful.
pole buildings was my post. once the building is put up it costs less than $2000 to spray on 3 or 4 inches of foam insulation. then you sheet rock over that to finish. very economical and quick to put up. i have a pole building on my property and it has held up quite well for many years.
Years ago, (almost 20) I bought 10 acres, found a 24 x 28 garage
Years ago, (almost 20) I bought 10 acres, found a 24 x 28 garage that someone wanted to sell (they wanted it dismantled) so they could put up a bigger shop. I bought it for $1200.00 paid a house mover to move it 10 miles ($4500.00) and had a cute get-a-way studio on a beautiful wooded acreage for under $20,000 by the time I got the services all in. What a deal.
no you pour a slab (yes you can heat the slab like you want) and
no you pour a slab (yes you can heat the slab like you want) and construct conventional footings and 4X4 framing that gets sheeted with corrugated metal siding and roof. last for ever is reasonably impervious to water damage as long as the skin is intact. only thing is they are like an ice box in the winter and an oven in the summer as the sheet metal will transfer heat or cold. the solution is to spray on closed cell foam before you finish the interior.
gotcha! I think I would stick with all wood and possibly do a po
gotcha! I think I would stick with all wood and possibly do a post and beam. Steel is brutal in this neck of the woods but thanks for the suggestion, Kurt.
I've seen the foam insulation sprayed in a few log homes here. I love the idea of the open concept.
Would the walls be fine at 8ft with something like that? Obviously I have to get this designed. Which is why I simply wanted some ideas to what we all though would be ideal dimensions first. Once I have that sorted, I'll start planning next.
Post and beam has me excited.
Kurt Foster, post: 448036, member: 7836 wrote: imo you need high
Kurt Foster, post: 448036, member: 7836 wrote: imo you need high ceilings. 15 feet at least. 16 feet or higher is better.
For sure, but if it was a post and beam how high would you do the walls? Obviously this is dependent on dimensions but I'm just dreaming right now, which I'm thinking would be anywhere from 24ft to 28ft wide and 28' to 32' long..
Right, I found it. my older iphone sucks, I'm missing some imag
Right, I found it. my older iphone sucks, I'm missing some images and stuff though it more than I realize at times.. Finally looked on my desktop.
http://tapeop.com/interviews/117/stuart-staples/
kmetal, post: 447934, member: 37533 wrote: The top 6 are th
kmetal, post: 447934, member: 37533 wrote:
![]()
The top 6 are the most well known ratios for small listening room modal response.
Since they are based on a 10' ceiling height, and aren't scalable, they essentially dictate the rooms length and width as well.
i think the ebu calls for 2,500 cubic feet minimal for critical listening rooms.
Unless it's ground up it's usually a matter of what ideal within the existing boundaries and budget, which untimatley determine the room quality.
Also differning design types for the CR like LEDE can lend themselves better to certain dimensions and shapes as well.
Another thing to consider is the finished dimension inside the room is easily 2ft smaller than the outer shell to allow for treatment, and that's minimal.
Something like Kurt suggested is a good place to start audio (looks real close to the IEC ration on the chart about half way down, although I'm not sure if they call for a 10' ceiling or not). The post rooms I've been looking at for research are often 40x50 or 25x35, usually pretty large with a low fundamental room mode.
Example of the first one of the list:
(edit) Looking at these figure (image you posted Kyle, thanks), would I adjust all equal to the H to get the correct dimensions?
1 H
1.14 W
1.139 L
scale to an 18' ceiling =
18 H
20.52 W
25.02 L
room ratios are are a good place to start but not an end all. so
room ratios are are a good place to start but not an end all. some rooms like the one Sound City had, defy conventions. Sound City's live room was basically a square and everyone will tell you that a square room is the worst place to record in. but for some serendipitous reason it worked for them and that room produced some of the biggest rock hits ever recorded.
for me the way to proceed is to build what you can in what you have. then deal with the issues you can hear in the room, like slap echoes, by splaying walls or diffusion. Then put a mic in the room and record something. that will be a baseline measurement you can listen to and from that you can begin address unpleasant room reflections that only show up on playback.
once you've identified and dealt with the problems you can hear in real time and in playbacks, it will be time to conduct some measurements and then proceed to deal with the stuff you don't hear like peaks and nulls through bass trapping, more diffusion and reflection reducing panels. the larger the space the easier it will be to tame issues with less treatments. i suspect this was the case with Sound City. the room was large enough that it essentially being square didn't present problems.
what i've found in my experience was very large rooms don't need much in the way of any kind of treatments. this is why i always insist a reasonable place to start is with minimum dimensions of 14 feet. if you begin with a ceiling that is 14' tall and go from there, i think you will be fine no matter what else you do.
imo, the entire room treatments industry does a huge dis service to recordists by insinuating unsuitable rooms can be made suitable with enough trapping and treatments. of course they charge a lot for these treatments and who's headed to the bank to make a deposit and who's withdrawing funds?
one thing i am sure of is there is nothing like having a great acoustic space to record in. it's a tool that cannot be duplicated in any other way.
Levon Helm's barn studio up near Woodstock NY is the ultimate to
Levon Helm's barn studio up near Woodstock NY is the ultimate to me. Beautiful old beams and big enough to bring in a small audience for the Midnight Ramble. I remember reading somewhere Levon talking about the whole thing being made using mortise and tenon joints, because he didn't want there to be any nails.
audiokid, post: 448052, member: 1 wrote: So basically I get my f
audiokid, post: 448052, member: 1 wrote: So basically I get my framer to do a 28 x 32 with 10ft walls, where the ridge beam ceiling peaks to about 18ft and I will be doing pretty good, eh?
i believe that would be stellar. one point would be to be sure to orient the direction your speakers fire into along the length of the roof ridge and not into the ceiling as it is sloping downward. John Storyk once told me when i met him briefly, "Never fire into compression. "
dvdhawk, post: 448053, member: 36047 wrote: Levon Helm's barn st
dvdhawk, post: 448053, member: 36047 wrote: Levon Helm's barn studio up near Woodstock NY is the ultimate to me. Beautiful old beams and big enough to bring in a small audience for the Midnight Ramble. I remember reading somewhere Levon talking about the whole thing being made using mortise and tenon joints, because he didn't want there to be any nails.
Every summer I finish at least one log home, some are done like that. That sounds beautiful indeed.
I've seen quite a few barn studios that are beautiful. One in pa
I've seen quite a few barn studios that are beautiful. One in particular was in the video doc about the Focusrite ISA studio console ...
(The section of the vid that shows and talks about this starts at 6:15. )
It belonged to Jay Beckenstein of Spyro Gyra, who built his studio (Bear Tracks) in a barn. It's gorgeous:
slap echo is what you are hearing in those rooms. cinder block
slap echo is what you are hearing in those rooms.
cinder block and stone are way different. stone is diffusive while cinder block is usually reflective. i have seen cinder blocks that were specifically engineered as diffusers. i could imagine they work very well due to their mass. very expensive though.
what is good about both stone or cinder blocks is they don't flex under sound pressure. if you were to put up wall board on studs at 8 foot centers you essentially have a wall that flexes with very deep bass. put insulation behind that and you have a spring bass trap. even a sheet rock wall on 16 inch centers is in some ways a bass trap, how much so depends on its thickness.
stone or block construction is one of the best ways to combat flanking issues. this is why we see so many studios built in brick, stone or cinder block buildings.
Is this a combo room (live room and mix room)? I'd start studdi
Is this a combo room (live room and mix room)? I'd start studding out a Barn, minimum 32 x 40 minimum. 25' center height minimum. 16' Side wall height. I'm going by easily buildable 8 foot math so adjust if you want for any golden ratios that make you feel more comfortable psychologically. Stud out something as large as possible and play with it over the years. If it's a balance initially between spending money on acoustical treatment or building it for size, I'd spend the money on size - a little more size than you referenced above. Then chip away at it over the coming years with more and more treatment. Even without a ton of acoustical treatment but some basic treatment (being a more lively room in the beginning), a larger room like that with partial gobos placed correctly works nicely. Other than square, no matter what dimensions/ratios you build, you will always develop favorite spots in the room - and those spots will change depending on what sound you desire at the time - that's a given. Building a room at least the size stated above (about 24,000 cubft min), will have its golden recording spots in there.
My live room I built 12 years ago is roughly the size I mentioned above. When I've recorded groups in there I know I wouldn't want it any smaller. I now also use it (just lately) as my mix room because my old mix room was smaller (10 x 20 x 11) with plenty of treatment and still wasn't cutting it compared to the big room with limited treatment (I know the treatment guys won't like that I said that). I'm no professional as some in here, but I sure enjoyed building the room and recording/mixing local groups/bands...and glad I didn't build it any smaller.
audiokid, post: 448072, member: 1 wrote: I notice this too. I d
audiokid, post: 448072, member: 1 wrote: I notice this too.
I don't recall ever liking the sound of clubs I've played in that had rock/ stone./ cinder/ "hard surface" walls like that.
They were so ringy and loud. What would be good about that?
I would think so too...
But the mix is the proof I guess...
This sounds pretty damned good to me. ;)
Recorded/Mixed at Bear Tracks, engineered by Doug Oberkircher and Phil Magnotti.
I've been wanting a barn studio for a while and when we recently
I've been wanting a barn studio for a while and when we recently moved a barn was a priority for me as much as the house. It came down to two pssibilities - one with a beautiful, huge circa 1870's barn with a smaller 200+ year old home and a newer larger home with a new "pole barn" detached garage (about 22x25) which is mostly metal. Unfortunately it wasn't all up to me and the larger home fit the family better, so that's what we ended up with. Not bad, but definitely not the rustic aesthetic I was hoping for. Would love to see how your build progresses.
audiokid, post: 448046, member: 1 wrote: Example of the first
audiokid, post: 448046, member: 1 wrote:
Example of the first one of the list:
(edit) Looking at these figure (image you posted Kyle, thanks), would I adjust all equal to the H to get the correct dimensions?1 H
1.14 W
1.139 Lscale to an 18' ceiling =
18 H
20.52 W
25.02 L
The louden and sepmeyer ratios are based on a 10' ceiling height and are Not scalable. I'm not 100% sure about the rest as far as reccomended ceiling height.
In general the room ratios are just a great place to start the conversation, and if you can build to them or close to them you'll have the opportunity for world class bass response as far as small listening rooms go.
It's worthwhile to play around with this calc to seem some basic room mode responses. You can try different ceiling heights and see how they effect the calculated response.
You don't have to have a masters degree to mess around w them a bit. They'll give a reasonably accurate enough depiction of what a rectangular space that size would respond naturally w no treatment. Basically the canvas your starting w sonically.
Since this is a combo room it's more along the lines of a post room or small theatre. At least something the size we're talking at this point. The easiest way is to design it with nuetral/flat acoustics for accurate monitoring. If you need to add some movable panels to add further reflections or absorbsion for tracking. It's easier to mix room tracking worthy than a tracking room mix worthy.
In truth most tracking rooms end up being what's leftover after the CR or happy accidents. Many records have been tracked in rented houses from the doors to the chili peppers. Tracking rooms are forgiving because you can move stuff around to find sweet spots. This isn't to designing a tracking room is easy.
It's big enough to sound good on its own with minimal treatments. Much of the consideration will be for logistics and layout, keeping it easy to move tracking based things like stands and amps or baffles around, while keeping a fixed and optional listening position.
It's probably good to identify how much isolation is necessary, since that will determine structural load requirements, outer shell, and slab design as well as other facets of the project.
audiokid, post: 448072, member: 1 wrote: I notice this too.I don't recall ever liking the sound of clubs I've played in that had rock/ stone./ cinder/ "hard surface" walls like that.
They were so ringy and loud. What would be good about that?
I always like to have a natural reverb/echo if possible / appropriate, since i was lucky enough to have used them regularly for a while.
Many many bathrooms and back halls have made the records. From the power stations siginature vocal and snare verb, to the Beatles and Paul Simon using the hallways.
Whenever possible I think it's good to try and take advantage of natural ambience. For mixing and tracking. Might not be the ticket for everything but it's nice to have on tap.
Woulda helped if I posted the link. Lol. Keep in mind this is f
Woulda helped if I posted the link. Lol. Keep in mind this is for a flat ceiling, but the info is worthwhile.
http://amroc.andymel.eu/?l=24&w=20&h=18&st=false&so=false&ft=true&r60=0.6
JayTerrance, post: 448079, member: 49019 wrote: Is this a combo
JayTerrance, post: 448079, member: 49019 wrote: Is this a combo room (live room and mix room)?
Yes.
JayTerrance, post: 448079, member: 49019 wrote: a larger room like that with partial gobos placed correctly works nicely.
Thats what I am thinking :)
JayTerrance, post: 448079, member: 49019 wrote: Other than square, no matter what dimensions/ratios you build, you will always develop favorite spots in the room
Thats so exciting. I love the idea of discovering sweet spots.
JayTerrance, post: 448079, member: 49019 wrote: My live room I built 12 years ago is roughly the size I mentioned above.
Wonderful. Is there anything you would do different?
JayTerrance, post: 448079, member: 49019 wrote: I'm no professional as some in here, but I sure enjoyed building the room and recording/mixing local groups/bands...and glad I didn't build it any smaller.
So cool, thanks for the encouragement and advise. This was exactly what I was hoping to hear.
Chris, Obviously I'm not the guy to give advice about "ideal" d
Chris,
Obviously I'm not the guy to give advice about "ideal" dimensions, or, for that matter, anything related to acoustics ( or construction); I'm learning a lot here this week myself, soaking it all in, and it's a lot to digest.
My scenario is different from yours, in that you are looking at building a whole studio; whereas I'm only looking at developing a mixing space, with recording limited to vocals, (maybe some acoustic instruments), but my primary concern is to have a well balanced space to mix in... and you are going for the entire studio project.
I'll leave the advice about dimensions to those who know... I guess if I had any advice to offer, beyond splayed walls, canted or arc'd ceilings... it would be to make it as big as you can; from what I've learned, you're far less apt to have to deal with the classic and predictable problems that small spaces so often have.
I like the idea of using Go-Bo's and baffles; I think that live recording is very cool... make sure you can maintain visual contact for the players to see each other. Also, getting fresh air in there is going to be important, too.
I've worked in some places that are so air-tight, that after a little while, people start to get logy, short tempered, and eventually, performances start to suffer... LOL... oxygen is important, but the good news is, it's free. ;)
On a side note, just for fun, if I were building something like this, I think I'd explore the possibility of a dedicated reverb/echo chamber; something like what Goldstar Studios had, or Abbey Road. I'm the last guy here to tell you how to do that, but it might be fun to at least consider. I know you have the Bricasti, but I think it would be cool to also have a natural space that you could use from time to time for natural echo.
I might also consider semi-permanently mounting a mic or two way up high, or maybe at the peak of the ceiling or something - or at least run a cable or install a jack panel up in spots like that, so that you could grab the sound from those hard to reach places. I mean, it might be a sonic disaster - but it might be kinda cool too!
Just a thought. Or two. Or three. :)
DonnyThompson, post: 448279, member: 46114 wrote: My scenario is
DonnyThompson, post: 448279, member: 46114 wrote: My scenario is different from yours, in that you are looking at building a whole studio; whereas I'm only looking at developing a mixing space, with recording limited to vocals, (maybe some acoustic instruments), but my primary concern is to have a well balanced space to mix in... and you are going for the entire studio project
My ideal studio is targeted towards mixing and recording mostly vocals and guitars. The rest of what I don't do well, nor really want to, I will shop out to musicians and studios that do example: beautiful drum work.
If I am doing the production I will be using a lot of electronics. I have been programming for 30 years already so I am basically improving on what I do.
To be clearer, I'd not likely be tracking drums for any other reason than to replace them. If I want live drums, I would send the session to a drummer who has the ability to record live drums that are compatible quality as all the other collaborators.
The focus is about collaborating with studios that have specific talents that record instruments better than I do or can for a particular client. Building relationships with musicians and studios that collaborate.
Kurt Foster, post: 448050, member: 7836 wrote: like the one Soun
Kurt Foster, post: 448050, member: 7836 wrote: like the one Sound City had, defy conventions. Sound City's live room was basically a square and everyone will tell you that a square room is the worst place to record in. but for some serendipitous reason it worked for them and that room produced some of the biggest rock hits ever recorded.
I watched that movie again a few nights ago - before it was Sound City, it was a Vox guitar factory - and as you said, it sort of defied explanation.
I mean, I'm sure a pro acoustician could get in there and eventually come up with the details as to how it worked, but most of the pro's that worked there were of the same opinion... "it shouldn't work"... "it can't work"... but it did.
And because it worked, because it sounded so good, there was probably no need - or desire - to figure out the "whys" and the "hows".
Especially for drums; man, the drum tracks recorded there sounded great - to me anyway. I'm sure that having that Neve desk, top-notch tape machines, all the other awesome OB gear they had, and the talented and knowledgeable cats working with all of that stuff didn't hurt, either... but it all started with the room, and people who were experienced with mic choices and placement.
I'm not a big Nirvana fan, never was really, but I can't deny that Grohl's drum sounds on tracks like Smells Like Teen Spirit sounded awesome.
IMO. :)
-d.
I read this thread with interest trying to grab so valuable info
I read this thread with interest trying to grab so valuable info..
I'm far worst than you Chris, I don't have the place or money to build anything. I just want to learn and one day it may serve me.
I'm wondering if some big prefab garage would not be a good start at a lower cost. Of course if you are use to build from scratch, it's the ideal path...