Hi Sebatron ,
TLM 103 is a bright mic, from 3K up, there are about +4db increase. Do you think Sebatron is good for TLM 103 mic for voice? What does the "Bright" switch mean? add some +db in high frequency? If that is the case, It might be too bright for the mic.
I heard that tubes will be worn out gradually. How often should the tubes in Sebatron s be replaced with new ones? how much are they? where to buy?
Thanks.
Dave
Topic Tags
Comments
i've been using a tlm103 through a VMP-2000eVu with incredible
i've been using a tlm103 through a VMP-2000eVu with incredible results.the harsh treble disappears to be rounded off well. :D
it suits my motu 828 very well i used to think the 828 was already bright but the valve preamp is a blessing.
The mixing time has been a joy :D
robbie_seat wrote: i've been using a tlm103 through a VMP-2000eV
robbie_seat wrote: i've been using a tlm103 through a VMP-2000eVu with incredible results.the harsh treble disappears to be rounded off well. :D
it suits my motu 828 very well i used to think the 828 was already bright but the valve preamp is a blessing.
The mixing time has been a joy :D
great! I have TLM103 and Motu828mkII too. The recorded voice sounds harsh. I am glad to hear that Sabatron can remove the harshness. have you tried the "Bright EQ switch"? will that make voice too bright? Thanks.
Do you have sound samples recorded with different mics? Thanks.
Do you have sound samples recorded with different mics? Thanks.