Skip to main content

I am picking up a radio frequency on my left speaker. I have changed cables I put it on the same power source as my other speaker. But it still has the station. Any ideas or suggestions to fix this would be very appreciated. Thank you all..

Topic Tags

Comments

moonbaby Wed, 02/08/2006 - 11:19

I have seen this same basic question asked on this forum in the past. Kurt Foster went through fairly elaborate steps to deduce what the cause was. Seemed that it always ended up being a problem inside a Behringer powered monitor. But if you tell someone, "Oh, it's just being a Behringer!", they take great offense at that.
I would tell you to open up the box and look at the connections inside it. There may simply be a ground wire that's broken off a connector. I can't tell you to open the box, though, if the unit is still under warranty. That would certainly void it.
What you might do is simply change you connecting scheme. For instance,don't connect the subwoofer. If there is a ground loop there, you won't have the hum if that is out of the picture. Play detective...