Litz wire
Ive been searching the forum, trying to read up on litz wire. who's the expert here on this stuff? Ive got a transformer which I think is a reichenbach which is similar in size to a 2503 and somewhat reminiscient in sound as well.
- Read more about Litz wire
- 10 comments
- Log in or register to post comments
G5 Power Supply Problem
Don't really have a question, but I think the current power supply/noise problem makes for a great discussion. If anybody hasn't been keeping up on this issue, the gist is that the power supplies included with the new dual G5 power macs are so noisey they're spilling over into the analog audio outs.
- Read more about G5 Power Supply Problem
- 3 comments
- Log in or register to post comments
SSL balancing (balancing in general too)
So I have the SSL boards, parts, and I'm going to start putting it together today, but I have to ask: What's the best way to go about unbalancing the SSL inputs/outputs?
- Read more about SSL balancing (balancing in general too)
- 10 comments
- Log in or register to post comments
GML 8802 op amps
Hi all,
I was rummaging around in my cellar and I found a couple of GML 8802 discrete op amps. Apparently this stuff grows down there. Anybody know if these are good for audio? I don't know anything about them.
- Read more about GML 8802 op amps
- 32 comments
- Log in or register to post comments
Powerbook/digi002r power supply noise!
Hi all
- Read more about Powerbook/digi002r power supply noise!
- 6 comments
- Log in or register to post comments
5703 tube vs AC701(k)
Hi,
- Read more about 5703 tube vs AC701(k)
- 14 comments
- Log in or register to post comments
malmac transformers?
Anybody ever hear of Malmac X10 AJ line transformers? They're 600 ohms:600 ohms and came out of an old Ampex duplicating chain recorder electronics, I think. Are they any good?
Thanks,
Seth
PS. This is all CJ's fault. I would have chucked them before.
- Read more about malmac transformers?
- 8 comments
- Log in or register to post comments
TUBE-TECH LCA 2B
I have a TUBE-TECH LCA 2B compressor in my shop for repair with a low level spitting on the right channel. It's not the tubes, does anyone have any sheets on this unit or could hazard a guess where I might buy a schematic?
- Read more about TUBE-TECH LCA 2B
- 6 comments
- Log in or register to post comments
SSL SL571 pinout
Darn it...
I've misplaced my SL571 pinout, and I need to get one wired up by Saturday evening for a recording... does anyone know anyone with an SSL5000 manual who can look up and post the pinout?
...This is a long shot, but I'm really pushed for time and all my buddies at SSL in NY and LA are finished for the weekend...
Keith
- Read more about SSL SL571 pinout
- 1 comment
- Log in or register to post comments
SSL 470K or R?
Sorry guys about this topic again...
I'm stuffing my SSL clone and I found out that the part list from the page doesn't match the diagram. On the list there is:
470K 1 RR-0636 $0.05 $0.05
470K 5 RR-0636 $0.05 $0.25
Both are the same so why write separate ?
And on the mounting diagram there is 5X 470R and 1X 470K so...
Any clue ?
Phil
- Read more about SSL 470K or R?
- 3 comments
- Log in or register to post comments