Is anyone else experiencing serious midi problems since the upgrade to 5.1? At the time of writing trying to record a click track for a new session what should be at lets say 9.1.000 is at 9.1.009/010/012. . This brings PT midi to new depths of despair... Is anyone else having these hassles?

Simon :mad:

ok. i now have some dope gear, but i think good cable will make all the difference [as in i'm using a friggin' RADIO SHACK S/PDIF cable from my APOGEE rosetta to my paris rig. f**ked up, i know]

so good patch/mic/digital cable?

and where to get it...

also: any input on good power conditioning?

If you would like to use more then one R.Ed. unit in a system (I.E. 2 R.Ed.s for 64 trcks, etc)and would like to mix with the R.Ed. mix/software. Unless you have 2 Mixpanders (1 per unit)

you will have to make a physical connection between the the 2 in order to have a common bus the travels between them.

Does that answer you q, mate? any others? :)

well this was originally was a question dealing with a PCI-to-Firewire card, but i got to thinking. if i'm not mistaken, the PCI slot has a transfer rate of 133 or so Mb per second for each slot. i thought i saw a company that advertised firewire PCI card for PC's, advertised with a xfer rate of 400Mb/sec. how can this be? the PCI would bottleneck this to 133, correct?

I've been tracking a "Christian Death Metal" band for the last week and a half. The guitars were all recorded by Micing a 4X12 cab with a 421 and a 57. Both close and faceing the cab about 6 inches away. They seemed to be in phase.

Anyone have any experience with this mic? Thought I knew 'em all, but this one is off the radar--no mention of it in any of my books or Electro-Voice literature.

I guess someone has to ask it...
How about a THOROUGH update on Mackie/SS? It's been a long time, and I'm sure a lot of us would like to know what's going on...

hy guys, just bought a used summit audio mpc100a mic/line/di preamp with integrated compressor. wonderfull machine. the thing is, i couldn't get a manual with it. now, the thing is, i'd like to get some info on certain points without having to get all the measuring equipmnet out of the closet. :confused: tried contacting summi audio by email, but they seem to be quite busy at the moment.

greetings...

i'm thinking about purchasing either nuendo or Samplitude, and i'm curious about opinions from users who have worked with both!
it's a pity that nuendo isn't avaible for a testdownload, but at least Samplitude is, and it runs very stable at my pc.

I was thinking of trying my overhead Oktava MC012 on my snare (since it sounds great as an overhead). I see on their web site that it's SPL @ 1 Khz is >140dB. If I close-mike it, that level limitation should be fine, right?

Thanks!