Hi,
I stored my condenser microphones in a cabinet with some silica gel packs. What's the Humidity/Hygrometer Reading supposed? 40-50?

Hi guys,

https://www.sweetwater.com/feature/vocal-mic-shootout/

Once again IMO the cheaper mics hang quite well with the pricey ones, which go all the way up to $9,000.

I'm looking at purchasing my first condenser microphone. I currently already own a mixer that I was planning on using with the mic that I buy, this mixer is an Alto ZMX52 however I'm having a big issue deciding which Microphone to buy due to phantom power. The mixer I currently have has an 18v Phantom power output and a lot of the microphones I'm looking at require a 48v supply.

Hi guys,

Here is a new mic shoutout that includes 3 products from microphone-parts.com
I had many questions about the mods and the DIY Kits.
Hope you can hear the subtle differences.

I'm still getting used to audio and video productions so your comments are needed and welcome.

Btw, I'm not a signer you might have guessed ;)

I recently bought the RODE VideoMic Pro to couple with my Zoom H1 in order to obtain better and cleaner sound in my videos by recording the person's voice from up top, as close as I can get to the mouth, which is normally around 30-40 cm.

I'm recording guitar with an digitech rp 250 processor and Reaper. When i record the guitar I sometimes need to adjust the gain level of the processor so that Reaper has a max level of about -10. Now let's say I want to add to that same guitar part recording but don't remember the gain level I used. What is the easiest way to make the dynamic levels match up?

* (This is my first time trying to record using a condenser mic and I have spent days trying to figure this problem out)

I am trying to connect an mxl 770 condenser microphone to my windows laptop to record audio. I purchased the following items:

==========================================================================
MXL 770 Condenser Mic

Hello,

Sorry if this is not the right place for this but I am having a bit of an issue trying to get the AT2035 mic to be picked up on Windows.