Hi there,

I've been using this setup more and more in the last year and I thought I'd share a little thing I found.
First for those who doesn't know how M/S capture is done :
(link removed by UA)

Now my secret : It doesn't work ! (well not perfectly that is)

Got your attention ?

Is it a gimmick ? Will it be the best we can buy ?

When they will emulate creativity ? ;)

Mojave Audio Launches Signature Series Line.
This is all I've found.

October 27th, 2015

There have been several threads on this subject throughout time here at R.O. and I feel that it is an important subject as many are using or attempting to use multiple mics on single sources or in some cases, for example, a singer songwriter performance where you have two sources effecting two or more mics at a time.

My microphone operating voltage is given as 4.5V but my computer on board sound outputs only 2.87V.

The Mic Worked but was not sesiive enough.How can I crank up my on sound Voltage or Can i buy an Sound card capable of outputting 4.5V

Thanks In advance

Hello. I purchased a Tascam US-4x4 interface for my windows 7 laptop. I'm hooking two dynamic XLR mics up to it. It took me three hours to figure out how to properly install the driver because even though it would install successfully, the Tascam panel and Audacity wouldn't read the device.

What AT 40 series mics do you recommend and for what? My requirements are mostly based around vocals, guitars and other stringed instruments but this thread isn't just about me. Thanks for any suggestions and the support towards Audio-Technica.

So I am thinking about investing in a new mic or mics but have quite a few questions.

So I am looking to pick up a new microphone for the use of recording male & female vocals. (Primarily male and mostly acoustic style tracks but also some EDM vocal tracking.)

I am also looking to pick up a new mic to record acoustic guitar.

Hi! I'm having a major problem with mic.. Im having audio dropouts in my recordings.
I have tried the mic and soundcard on my dads computer and it worked just fine.
So i guess it must be a problem with my PC, at first I thought my USBs wasnt powered enough for phantom power,
but I bought a powered usb hub and it didnt solve the problem.

Hi

I made a account here because I can't find help anywhere else.

I have had microphone problems for about a year.
When I touch computer case the noise isn't so bad but still exits, and when I move microphone in some positions the noise changes little bit. Time to time it was so bad that mic didn't pick my voice at all. Sometimes it was like helicopter...