How many productions are being cut today without a click track that say. . make the grade or seroiusly have the potential?

Sorry about the duplication (posted on eMagic as well) but I need some help...

I'm running a PC based MOTU 828 w/ Logic Plat software and I keep getting pops and clicks during playback and bounce-down. I have heard adjusting the buffer settings may stop this. What do I set them to? This is driving me nuts... :(

Thanks for the help.

zip >>

I keep hearing pops and clicks during playback and bouncing. My system is a PC based PIII 550Mhz / MOTU 828 using ASIO drivers and Logic Platinum software.

I've heard about setting buffer settings to avoid this...

Is this the problem and if so...where should they be set?

Thanks! zip >>

I am using a K2500, and I notice there are intermitant clicks or glitches.

During a vocal recording today, I noticed the occasional click on the recording (similar to that created when a digital system can't quite cope or it's clocks are out of sync) about once every minute or so. After checking all of the clocks etc. I realised that it was coming from pre-ADC source (I saw one spike on the pre-amp during a take). The mic is a Manley valve Reference.

I've noticed that with vocal recordings (voicovers) done w. a Neumann (any TLM) and say an AMEK preamp and a D3 or dbx (simply put; top of the line preamps and compressors) spittle-sounds or abrupt transients will cause extra click-type sounds or small distortions. This shouldn't happen right ?
Or is this...natural vintage behaviour ?

I have been having a very frustrating ordeal with trying to get rid of the clicks/pops/noise on my recordings. I have been very thorough about trying many optimizations but nothing has worked yet. If anyone could help me I would be forever in their debt..

hi there,
hope everythins is fine with you all.
I lurk here sometimes, and I've posted a few.
I'm gonna switch from AD to DP, I've ordered DP3.0.

Hi group,
I'm getting a click during the silence before an audio track begins. Tried altering the buffer size but it made no difference.
I'm running at a sample rate of 44.1k - should I be using 48k?
Setup: Mac G4, VST4.0, MOTU2408

If you have given up using the Steinberg DeClicker plugin I have finally found the fix!

1.) close PT. then remove the DeClicker plugin located in the systems folder in DAE folder and put it into the plugins(unused) for now

2.) boot up PT to set a new cache

3.) close PT

4.) put the DeClicker plugin back into the DAE plugin folder