Hope I am posting this in the correct forum...

I'm trying to get a Symetrix TI-101 phone patch working. My biggest problem...

I use a line splitter to take the phone line into the Symetrix. The other side of the splitter goes to the telephone. To open the phone line, I have to take the handset off the telephone base.

Hi all...I've heard several people talk about making their own patch cables. I have a set that I purchased from the store, and didn't really think twice about them until today. My entire rack is wired with nice cabling (Monster) except for the patch cables- so what is the cheapest way to go about upgrading without spending big $$$? Thanks!

I read this today in a review of the Sebatron .

"Be careful if you daisychain the channels to not use a guitar cable as it could damage your vmp-2000e. Instead, use a 1/4 unbalanced patch cable."

Forgive me if I'm an idiot, but isn't a guitar cable nothing more than a 1/4 unbalanced patch cable?

I've got a Yamaha S03, that I'm finally getting good with to play a little with the band. There are only a few presets/patches that I use most of the time. But it's difficult to navigate to them using the on-board cursor keys, and nearly impossible to do it in real time while playing.

Another question from the resident n00b. :D

I am currently using Cubase 5.1 along wit h the proteus 2000 sound module, I expanded wit h the pure phat chip . my only problem is i cant pull it up in Cubase .. i can pull up theproteus and the mo phatt but not the pure phat .., i tried selecting the mo [hat patch but the sounds and names dont match up

How do you get patches from the expansion cards in a 1080 to show up in the patch window in DP?

I was wondering when people who use mix compression patch it in. I've tried early and later, but haven't determined a method. I don't often use mix compression; I had some bad experiences, with cheap gear, and tended to leave it for mastering. Now that I have nicer units available, I'm going to try again.

Thanks for the advice :D

I'm having difficulty creating a working patch list for a Technics PR307 keyboard, to be used in Digital Orchestrator.

The root of the problem is that the PR307 uses the same patch numbers for all the instruments in a group (all the organ voices, for example use patch number 7). The variations are selected by means of LSB abd MSB values.