Would this shockmount/pop filter fit a Shure SM57: http://pro-audio.mu…"]Buy Nady SSPF-4 Microphone Pop Filter | Pop Filters | Musician's Friend[/]="http://pro-audio.mu…"]Buy Nady SSPF-4 Microphone

when I bought my mics I just put the mics in the shouckmounts and figured they should be good to go, but when recording the audio is crazy, from a distance away I can hear so much, I can rub my feet on the rug and hear it,when I walk I can hear it, I guess I lack knowledge, the mics I'am useing are the Studio Project B1 and the MXL v63m I'd appreciate if someone could help me out thanks

Hello RO,
I have a couple of cheap shock mounts I got for a couple of MK-319's off ebay about ten years ago. Also, a third one for a AKG C4000B/414.

The black colored cord thats used to keep the shock mount strung has lost its elasticity. Does anybody know where to get more elastic cord and metal hardware to connect the ends?

can i have yours?=)

Alright, I have a studio projects B1 mic, And It came with a shockmount, But the part on the shockmount that fits screws on to the stand is to small.

http://66.201.119.52/pictures/ACFCDF.jpeg

Hi. I need a shock mount to fit the MXL V67g or V67i mic (and maybe others...I don't know which others share that form factor). I have read that MXL's official shock mount for these mics, the MXL 57, leaves a lot to be desired.

I just ordered a Schoeps MK8 to do mid side. I also unfortunately ordered a Schoeps AMS 22. Why unfortunately? Because I'm not fond of paying $184 for a single plastic mic clip.

Do any of you know of alternative (cheaper) mid side shockmounts/clips that would accomodate these 21mm mics (cmc6)?

Thanks,
Grant

I'm looking for a mount for an AKG 422 - any pointers appreciated. Shaft diameter of the microphone is 33mm.

Thanks,
Karl Lohninger
Los Angeles

I want a different shock mount for my Studio Projects C mic. The one it came with BLOWS. The bands always are coming loose.

Any suggestions?

Thanks!

---JC

Hi all,

Well I'm a little aggravated this morning. I've been eyeing the Shure donut mounts for a couple of weeks now and finally picked up a pair. Turns out the diameter of the 451 is too small for the Shure mount!

Anyone else have any ideas on how to shockmount a 451? I'd prefer not to have a bulky spider mount, but I don't know what else I could use.