Hey guys quick question I had two way communication (Ability to monitor the live and computer mix at the same time.) going on my M-Audio Fast Track Ultra, my EuroDesk SX2442FX Mixer + A sh*tty live wire 4 channel head phone amp and I't worked great. Now I have added some new equipment A PreSonus Tube Preamplifier and a Behringer Power Play Pro XL Head Phone Amp. Heres the way I have it setup now Fast Track outs 1-2 to main in left and right on the Power Play Pro then main outs left and right of the Power Play Pro to channel 21/22 left and right on my mixer then my monitor speakers are in the main outs of the mixer. Lastly my Main out of the PreSonus is in Mic/Inst line 1 of the fast track with the mic being in the input. The only problem I face now is I can here the computer mix fine, but I cant get a live mix as well. Also, is my routing right should I be using a XLR to 1/4 and run the Tube Preamp into a non preamp channel of the mixer then route it to my m audio to bypass all but the PreSonus preamp? If some one could give me some insight I would really appreciate that. Sorry if I worded this like an idiot all these things looping is starting to get confusing lol
Comments
Ok, basically if you guys had a Behringer Eurodesk SX2442 FX Mix
Ok, basically if you guys had a Behringer Eurodesk SX2442 FX Mixer, M-Audio Fast Track Ultra Audio Interface, PreSonus Tube Preamplifier and a Behringer Power Play Pro- XL headphone amplifier how would you route all of it to have two way communication (Having the ability to monitor a live & computer mix at the same time.) Aswell as bypassing all the preamps except the PreSonus.
Ok, thanks Jack. Here is how I have every thing routed now see i
Ok, thanks Jack. Here is how I have every thing routed now see if this sounds correct. AKG Perception 220 mic xlr cable to the input of the PreSonus Tube Preamplifier. From there I have the PreSonus's output 1/4 TRS going to the line in of channel one of my Behringer Eurodesk SX2442 FX Mixer (Does line in bypass the Eurodesk's Xenyx Preamps? I only use my mixer for routing signals via subgroup out to my audio interface.) Next I assign channel one of the Eurodesk to subgroup 1 & 2 set group 1 to left and group 2 to right. Now I run 1/4 cables out of the subgroup outs to the 4 1/4 inputs of my M-Audio Fast Track Ultra (Will line in's bypass M-Audios preamps?) Next I run the outputs 1 & 2 of the Fast Track to the inputs of the Berhinger Power Play Pro-XL Headphone amplifer left and right. Then the main out left and right on thePower Play to Channel 21/22 of my mixer and set volume then plugin my monitor speakers on the main out of the Eurodesk left and right.
Sorry, one more question. I just noticed when i'm recording thro
Sorry, one more question. I just noticed when i'm recording through the Pre Sonus im getting a stereo head phone mix it seems but on playback through Sonar X1 Producer Im only getting a mono left mix even when I pan the channel completely right any ideas? Sorry if these questions are noob just getting use to the new equipment.