redcat
27 May 2020
If I have the KRK gen 4 Rokit 8 monitors, but then I found a Gen 3 KRK K10s Powered Sub, it's gonna run just fine right? There's no reason I shouldn't hook this up?
Comments
Boswell, post: 464441, member: 29034 wrote: It should work fine.
Boswell, post: 464441, member: 29034 wrote: It should work fine. Cable your DAC or mixer outputs to the inputs of the sub and the high-pass outputs from the sub to the speakers. The only tricky thing may be getting the relative levels correct between the sub and the mid/tops.
The KRK 10S has a jack for a bypass switch. A handy tip is to get a footswitch of the type used for toggling guitar effects and use that for switching the sub in/out. I use it all the time for checking the low end balance in mixes.
Thanks!
It should work fine. Cable your DAC or mixer outputs to the inpu
It should work fine. Cable your DAC or mixer outputs to the inputs of the sub and the high-pass outputs from the sub to the speakers. The only tricky thing may be getting the relative levels correct between the sub and the mid/tops.
The KRK 10S has a jack for a bypass switch. A handy tip is to get a footswitch of the type used for toggling guitar effects and use that for switching the sub in/out. I use it all the time for checking the low end balance in mixes.