x
anonymous 6 April 2004

Hey, I'm hoping someone has some expeirience with hard drive setups. I am trying to organize the 3 hd's in my daw for the smoothest results.

Here's the list:
Seagate 120gb 7200 8mb buffer master ata100
Western Digital 40gb 7200 2mb buffer master ata100
Maxtor 40gb 5400 2mb buffer slave ata66

Currently, I have XP on the WD, record audio files to the Seagate, and samples/vsti's spread throughout all 3. My main question is where should the samples and vsti's live?

Projects usually involve tracking while running drum/key/bass samples.

Should they go:
1) on a slower, but seperate slave drive to the OS (maxtor)
2) audio drive, which may interrupt tracking and/or playback
3) OS drive, with xp/cubase/and plugins

Thanks
-a

Comments

mjones4th Wed, 04/07/2004 - 09:43

What DAW software are you using? How many audio tracks are you running? What are the specs on your computer?

My philosophy is, one drive for audio, one for samples, and the other for everything else. Here's my setup. I'm using Logic Pro 6 on a G4 733 with 3 HDDs

1 60Gig 7200 RPM 2MB
2 120Gig 7200 RPM 2MB

the 60 houses my OS and all applications, including software instruments (in my case AUs). You won't get a speed increase by putting applications or VSTi's on a separate HDD because upon startup, the app gets loaded into RAM.

One of the 120s has vocals and other tracks.

The other 120 has samples.

Since the EXS does disk streaming, i thought it best to put the samples on a separate drive. If your sampler of choice does disk streaming, then I would suggest you put them on a separate drive. Even putting them on the 5400 RPM drive would be better. Or better yet, move the OS and apps to the 5400 RPM drive, and use the 40GB 7200 RPM drive for your samples.

Consider partitioning your OS drive, to provide storage for miscellaneous stuff.

anonymous Wed, 04/07/2004 - 11:54

Change the channel...

Hey,
Good advice. Also, try to refrain from putting ANY hard drive on the same channel as an optical drive or slower peripheral such as ZIP drives, etc.

The "Computer Music" mag (or was it "Future Music"?) from the UK had a series of articles this past winter regarding setting up hard drives for DAWs. There's even a "best" way to do it on the cheap with just one drive, though they advise against it, of course. I could try to find my back issues and make .pdfs of the articles if anyone is interested.

anonymous Wed, 04/07/2004 - 21:05

Hey, thanks for the responses.

My setup is this:
AMD XP2100+
512 PC2100
Cubase SX 2
Usually max 8 tracks audio (not including samples)

i do have a dvdr as slave to the 120gb, but i have read many conflicting acounts of whether this affects performance or not. Some say it does, others think it's ludicrous. I will have to research deeper on that subject as it will probably be a deciding factor here. I would be interested in those pdf's if you do spend time to make them.

My OS drive is partioned as 15gb NTFS for handling 4gb+ files, 15gb FAT32 OS partition, 8gb sampler partition.

Thanks for the feedback, I will have to do some more searching on a few issues.

-a

anonymous Fri, 04/16/2004 - 08:42

Re: Change the channel...

Tarzanalog wrote:
The "Computer Music" mag (or was it "Future Music"?) from the UK had a series of articles this past winter regarding setting up hard drives for DAWs. There's even a "best" way to do it on the cheap with just one drive, though they advise against it, of course. I could try to find my back issues and make .pdfs of the articles if anyone is interested.

Yeah, I'd love that!

Also let me ask you:

with three drives one of them will end on the same IDE controller as the cd-rom drive, which is much slower and will cause a bottle neck? How did you set up the whole thing?

x

User login