Skip to main content

Hello again, fine folks,.

As it looks like I'll be needing an 8 channel preamp when I get the MYGDA epansion card for the AW 2400 to give me 16 simultaneous mics for my drum kit,( pheeeeeewwwwwww,..takes deep breath ! ) can any one recommend a suitable unit ?
I've spotted a 'Mackie Onyx 800R' that seems to be ideal,( aside from the £ 1000 price tag :( ).
Also, would a transistor, tube, or hybrid type be best ?

Ermmmmm,.. Over to you learn'd people,..

Cheers,. . Dan.

Comments

anonymous Thu, 03/30/2006 - 16:03

backinthelab wrote: Depends on what you want to spend. I've never used the Mackie but have heard that it's decent. Check out the True Systems 8, UA 8110, (2) Focusrite ISA428's, or an API lunchbox. Again, it's all dependant on what you're willing to shell out.

Hey, backinthelab, thanks for the advice,..

I'll check those-out,...

As for budget, well, if I need to spend a few quid,( £ 1000 ) on a pre amp, then, so be it,.. It's a pity the standalone AW 2400 doesn't cater for 16 mics from the word go, ( I guess it'll come in a couple of years in the next version of the machine ? ).

I think it would be worth buying a decent out board pre amp as it would be usable on other set-ups in years to come,.....

Thanks again for the help,...

Cheers,.... Dan :D

anonymous Thu, 03/30/2006 - 19:52

Well I have my eye on a Shadow Hills Gama 8 with switchable transformer and non transformer selections this thing is friggin sweeeeet!!!!

http://www.vintageking.com/s.nl/sc.13/category.39/it.A/id.5128/.f

At under 4 grand it is not a bad deal either. I have heard some test recording off of this unit and I don't think it is a bad option to consider.

Getting a pair of API 3124's is not a bad idea either and cheaper than the lunch box option - really fast transient response which is great for drums (I own one)

good luck!

anonymous Thu, 03/30/2006 - 23:52

I have a JLM TMP-8 (http://www.jlmaudio.com) which I find to be a fantastic 8 channel pre- very clean and clear, really tight bottom and clean highs... heading towards API style without the pricetag.

If you're after something more Neve-like (i.e. quite coloured), why not consider one of the many clones around, like SCA and others... If you're up to a little bit of building. I haven't heard these myself, but have only seen positive comments about them!

mugtastic Fri, 03/31/2006 - 01:07

i don't understand. you want to record 16 tracks of drums at a time using half yamaha pres and half something better? shouldn't you be looking to match the new 8 to the yamahas?
also i thought the website said the recorder could only record 16 at a time at 16 bit not 24.
also thought space was an issue so wouldn't a laptop and interface w/pres take less room than a standalone daw plus mixer?

just curious.

anonymous Fri, 03/31/2006 - 06:56

mugtastic wrote: i don't understand. you want to record 16 tracks of drums at a time using half yamaha pres and half something better? shouldn't you be looking to match the new 8 to the yamahas?
also i thought the website said the recorder could only record 16 at a time at 16 bit not 24.
also thought space was an issue so wouldn't a laptop and interface w/pres take less room than a standalone daw plus mixer?

just curious.

Yup,..that's about it Mr.mugtastic,... Not knowing how 'good ' the Yam i88x pre installed pre amps are in the first place,and also not knowing what's available in the form of out board pre amps is my reason for participating in a forum such as this,..to gain opinions !
Sure,it'd be ideal to have all 16 channels with matching pre amps, but then, I am still very limited for space, so the less out board equipment, the better,..and a stand alone DAW will always be more portable than a separates system,...
( Though I haven't completely ruled-out a Mac based system, as I would like to record with sixteen tracks in 24 bit ,..It all depends on how flexable each option is, and how much bang for my pound I can get ).

Thanks again to everyone for your advice, it all helps :wink:

anonymous Fri, 03/31/2006 - 10:07

Mugtastic and CaptainBeardy...

You seem to be of the opinion that matching pre-amps all around are desirable.. but certainly a bit of variety can help give you a little more flexibility. Standalone pre-amp modules weren't just designed for DAWs, they also find a lot of use feeding into a console insert for a bit of flavour.

Personally, I wouldn't be hung up on trying to match the preamps to those of the yamaha- better off thinking about what will give you the most flexibility and what you'll use more. But each to their own!

What would you rather? 5 Ferraris, or a Ferrari, a Porsche, a Lambourghini, a Bugatti and a Mercedes?

(p.s. I hope you don't have a fetish for Ferraris, otherwise my analogy was a waste of time)

mugtastic Fri, 03/31/2006 - 10:23

i totally agree. if it was me w/ 8 pres looking for more i'd go in a "different" or "better" direction - no question. from previous posts however, it seems that the goal here is to record 16 tracks of a huge drumkit onto as small a setup as possible.
instead of a standalone daw w/expansion card and outboard mixer at 16 bit, i would think a laptop w/2 firepods would fit the bill WAY better. (that setup would fit in the change pocket of your jeans)
now, i use a mackie board into an older yamaha standalone w/out the newer versions usb interface flexability, but i like it for the ergonomics and cliche free performance - not for # of tracks and footprint. actually the idea of a studio w/out a fader in sight gives me the heebie jeebies.
beware that the limited versions of software that are more economical (and come w/the firepod btw) will not allow 16 track at once recording.
how about this - eliminate the restriction of 16 at once and create stereo submixes of a few toms etc. to get the kit down to 12 tracks. 12 tracks at 24 bits will kick 16 tracks at 16 bits ass!

anonymous Fri, 03/31/2006 - 14:17

recordometer wrote: Mugtastic and CaptainBeardy...

You seem to be of the opinion that matching pre-amps all around are desirable.. but certainly a bit of variety can help give you a little more flexibility. Standalone pre-amp modules weren't just designed for DAWs, they also find a lot of use feeding into a console insert for a bit of flavour.

Personally, I wouldn't be hung up on trying to match the preamps to those of the yamaha- better off thinking about what will give you the most flexibility and what you'll use more. But each to their own!

What would you rather? 5 Ferraris, or a Ferrari, a Porsche, a Lambourghini, a Bugatti and a Mercedes?

(p.s. I hope you don't have a fetish for Ferraris, otherwise my analogy was a waste of time)

Cheers, recordometer,.....

I've read that several types of pre amp are desirable, for ,as you put it 'flavours' can be chosen,....

As for a Ferrari, well, if they made a van version, then I'd be interested so I could get my drum kit into the back of it 8) :lol: !

anonymous Fri, 03/31/2006 - 14:39

mugtastic wrote: i totally agree. if it was me w/ 8 pres looking for more i'd go in a "different" or "better" direction - no question. from previous posts however, it seems that the goal here is to record 16 tracks of a huge drumkit onto as small a setup as possible.
instead of a standalone daw w/expansion card and outboard mixer at 16 bit, i would think a laptop w/2 firepods would fit the bill WAY better. (that setup would fit in the change pocket of your jeans)
now, i use a mackie board into an older yamaha standalone w/out the newer versions usb interface flexability, but i like it for the ergonomics and cliche free performance - not for # of tracks and footprint. actually the idea of a studio w/out a fader in sight gives me the heebie jeebies.
beware that the limited versions of software that are more economical (and come w/the firepod btw) will not allow 16 track at once recording.
how about this - eliminate the restriction of 16 at once and create stereo submixes of a few toms etc. to get the kit down to 12 tracks. 12 tracks at 24 bits will kick 16 tracks at 16 bits ass!

Interesting, mugtastic,....

So,..you're currently using a Yamaha stand-alone,( which one ? ) with a Mackie mixer,( hasn't the Yam stand-alone already got a hardware mixer ? ) and two Firepod pres ?
How many tracks can you simultaneously record at once ?
( And all 24 bit ? ).

As I mentioned before, I haven't ruled out completely the separates / Mac / Lap top route,...but I've heard horror stories concerning latency and, like you, I'm a hands-on man, and would much rather work with actual faders and ,ahem, knobs, than all that ' virtual ' console malarky,( shudder at the thought,.. ! ).
Also, there seems to be a bewildering array of programs available for PC / Mac systems,..any idea of a good'un that does my beloved 16 tracks, and what would I have to pay ?

I didn't quite get what you ment by stereo submixes of the toms ?

Apologies for the 'sonic inquisition', ... :lol: :roll:

mugtastic Fri, 03/31/2006 - 15:55

i don't have firepods, thats just a small solution w/a laptop.

i use a mackie cr1604 board into the eight inputs of a yamaha aw4416 all-in-one daw. i had the mackie from a previous reel-to-reel set-up and it sounds better than going straight into the yamaha (or so i think). it also gives me control over mics and other sources as 16 channels are available to go to compressors or straight into the recorder. i can easily control levels and routing while playing drums.

the yamaha will record 8 tracks at a time at 24 bits, but its a small kit and i only have 9 mics anyway.

submixing for me is recording snare and kick to a track each, then the rest to 2 tracks having created a stereo mix of several mics in the board. i've been doing this for long enough that i know what i want in mix. i also record all the mics to separate tracks sometimes too.

for you i would save some tracks by recording a 2 track stereo mix of, say 4 toms plus a 2 track stereo mix of several overhead/room mics to get down to 12 tracks at 24 bit. just a thought.

unless i was top and bottom micing every drum i couldn't imagine using 16 tracks for drums, but if thats the dream of a monster kit guy like you, maybe you should compromise on the other stuff and go 16 craazzy!

Davedog Sat, 04/01/2006 - 09:48

I'm going to third the JLM as far as value and sound. It is a very good box and with the limiters option it makes a very easy to use drum preamp. It is tending towards API, this is true, but has its own stamp on the sound and is high enough quality not to make you want to pull out your hair at mix due to a horrible buildup of some nasty sounding frequencies.

A great value. There is a review somewhere in the archives about this unit. Search function should put you on to it.

All the other suggestions...ie: API lunchbox (my fave), API 3124, True 8,even the Mackie Onyx, are all excellent units too.

anonymous Tue, 04/04/2006 - 12:29

Cheers, chaps and chapess',...

I've been investigating the power Mac quad set-up today, as I'm starting to go off the idea of these stand alone DAWs due to not being able to record with 16 simultaneous channels in 24 bit !

How does this sound for a set-up ; Power Mac Quad + 2 X 8 channel Focusrite pres / interface, ( or Mackie Onyx 800Rs ) + Mackie control surface ?
I'm not sure about what software though, ( I've read that Logic 7 is good with the Mac for nearly zero latency ? ).

anonymous Tue, 04/04/2006 - 14:39

mugtastic wrote: sounds good. instead of squeezing the demands of your kit into a limited set-up, you would be allowing the behemoth to lead you in an upgradable situation with much room to learn and grow!
when i make this step i'll go mac + logic.

Cheers, Mr.Mugtastic,....

Glad to hear my new idea is a good one,..
Well, if you're gonna do it, might as well go for the best possible scenario, and its upgradable as you say,..... ( so much for my portable ideas,eh ! LOL ).
I'll have to get a short course on how to use the software though,...
That'll be a learning curve and a half,....
Oh well, serves me right for being a drummer, I s'pose !

Cucco Thu, 04/13/2006 - 11:04

I have to weigh in here on a couple things.

1 - matching of preams...totally not necessary. I like my 4 channel DAV for orchestral stuff where matching and complimenting are a positive thing. For drums, I'll gladly mix and match where I feel I'd like it.

2 - Holy mother of sweet Jesus...16 tracks for drums!!!!??? :-? I know, I know, you probably really aren't using ALL 16 tracks, but seriously... My best drum sounds come from minimal micing -ALWAYS. I've never gotten a better sound by micing the tops and bottoms of each drum and the edge of each cymbal. My most common setup is -

Beyer M130/M160 M/S combo in front of the kit at about eye level around 3 to 4 feet in front of the kit.

SoundElux U195 about 6 - 8 inches outside the 5" port on the Evans head (You are using Evans, aren't you...??)

Audix i5 or Shure SM57 over the snare

Occassionally, I'll add a mic here or there for flavor, but rarely do I ever breach the 8 channel mark.

3 - I will weigh in on the pre too.

A - I just purchased the Mackie 800R after having EXCELLENT results from the Onyx 1220! I LOVE the sound of the pres - no really, I LOVE THEM!! I would use them over the True Systems ANY DAY (but, I am a professed dis-liker of the True Systems preamps).

Do they compare to the likes of Grace, Millennia, DAV, Buzz, etc...Well, in a word - YES. Do they best any of these?? No. But for the money, they are damned fine. Plus you get great conversion and a hellacious number of digital format outputs to boot. Oh, and you can come in via line level and bypass the pres all together, thus making it a good (far better than $1000) A/D Conversion system!!!

Other than that, I would consider (maybe close to your price range) the Lunchbox or similar. Old School's setup with a couple pres in place would be in your range and would give you the flexibility to add other flavors down the line. Granted, you couldn't get 8 channels at your price range, but you could get close. I bet Nathan's even got a special or can work some kind of deal if you buy a full 8 pack...

Good luck...

J.

anonymous Thu, 04/13/2006 - 15:50

Cucco wrote: I have to weigh in here on a couple things.

1 - matching of preams...totally not necessary. I like my 4 channel DAV for orchestral stuff where matching and complimenting are a positive thing. For drums, I'll gladly mix and match where I feel I'd like it.

2 - Holy mother of sweet Jesus...16 tracks for drums!!!!??? :-? I know, I know, you probably really aren't using ALL 16 tracks, but seriously... My best drum sounds come from minimal micing -ALWAYS. I've never gotten a better sound by micing the tops and bottoms of each drum and the edge of each cymbal. My most common setup is -

Beyer M130/M160 M/S combo in front of the kit at about eye level around 3 to 4 feet in front of the kit.

SoundElux U195 about 6 - 8 inches outside the 5" port on the Evans head (You are using Evans, aren't you...??)

Audix i5 or Shure SM57 over the snare

Occassionally, I'll add a mic here or there for flavor, but rarely do I ever breach the 8 channel mark.

3 - I will weigh in on the pre too.

A - I just purchased the Mackie 800R after having EXCELLENT results from the Onyx 1220! I LOVE the sound of the pres - no really, I LOVE THEM!! I would use them over the True Systems ANY DAY (but, I am a professed dis-liker of the True Systems preamps).

Do they compare to the likes of Grace, Millennia, DAV, Buzz, etc...Well, in a word - YES. Do they best any of these?? No. But for the money, they are damned fine. Plus you get great conversion and a hellacious number of digital format outputs to boot. Oh, and you can come in via line level and bypass the pres all together, thus making it a good (far better than $1000) A/D Conversion system!!!

Other than that, I would consider (maybe close to your price range) the Lunchbox or similar. Old School's setup with a couple pres in place would be in your range and would give you the flexibility to add other flavors down the line. Granted, you couldn't get 8 channels at your price range, but you could get close. I bet Nathan's even got a special or can work some kind of deal if you buy a full 8 pack...

Good luck...

J.

Thanks for the advice, Cucco,...

Yes ,I'm afraid I'm planning to use all 16 tracks simultaneously,( BIG kit = 2 X bass drums, 8 X toms, 2 X overheads, Hi hat mic, snare mics, top and bottom, and the 16th track / mic for either timbale / tympani / gong bass drum or other assorted sound ! ).

I've heard all the arguments concerning using only three mics , etc,,... But, I never seem to do things the easy way, and I nearly always end-up spending shed-loads of money on the best equipment I can get, ( I've just ordered a matched stereo pair of AGK C414s at nearly £ 1500 !! ).
Well, at least it'll all last my life time, and give the best results, providing I fathom-out how to work all this technology :?

I've had my eye on the Mackie Onyx 800rs, and I'm thinking a pair of these going into an RME Fireface and then into a Mac G5 Quad with Pro tools !

This could just be the year of the steep learning curve :)

Markd102 Thu, 04/13/2006 - 17:04

CaptainBeardy wrote: Yes ,I'm afraid I'm planning to use all 16 tracks simultaneously,( BIG kit = 2 X bass drums, 8 X toms, 2 X overheads, Hi hat mic, snare mics, top and bottom, and the 16th track / mic for either timbale / tympani / gong bass drum or other assorted sound ! ).

Holy crap! Who are you recording? Neil Peart?

CaptainBeardy wrote: I've had my eye on the Mackie Onyx 800rs, and I'm thinking a pair of these going into an RME Fireface and then into a Mac G5 Quad with Pro tools

You won't get the RMEs to interface with Protools any time soon.

anonymous Fri, 04/14/2006 - 04:36

Markd102 wrote: [quote=CaptainBeardy]Yes ,I'm afraid I'm planning to use all 16 tracks simultaneously,( BIG kit = 2 X bass drums, 8 X toms, 2 X overheads, Hi hat mic, snare mics, top and bottom, and the 16th track / mic for either timbale / tympani / gong bass drum or other assorted sound ! ).

Holy crap! Who are you recording? Neil Peart?

CaptainBeardy wrote: I've had my eye on the Mackie Onyx 800rs, and I'm thinking a pair of these going into an RME Fireface and then into a Mac G5 Quad with Pro tools

You won't get the RMEs to interface with Protools any time soon.

I might as well be recording Mr.Peart LOL !

Oh, BUGGER ! Soooo, RME stuff is incompatable with Pro Tools then :(

Thanks for the tip-off , Markd102 8)

anonymous Fri, 04/14/2006 - 04:40

mugtastic wrote: don't the mackies do the a/d conversion thereby not needing a separate interface?

I thought the Mackies did have internal A/D converters, but I was thinking of by- passing them and using the RME ,...
Now I've just been told that Pro Tools won't work with RME, I might give the RME a mis !

x

User login