Hi All
got a budget of $1000-$2000 CDN
Most bands will be recorded in bars and isolating the kit in most cases is a R-PITA so in one sense the tighter the pattern the better
Any and all suggestions more than welcome including isolating the kit DIY style if possible
thanks
Don
Topic Tags
Comments
The tightest pattern condensor I know for drum overheads would b
The tightest pattern condensor I know for drum overheads would be the AKG C430. They are not a fantastic mic, but the main problems I had with them was their poor off-axis response (a plus for live situations), and their higher-than-most self noise (also not a problem in live situations.
I'd sell ya mine, but I'm thinking about holding on to them for maybe highhat duty or if I ever need some at a live venue.
I think DaveDog's suggestion on the 451's is pretty good. I'd li
I think DaveDog's suggestion on the 451's is pretty good. I'd like to know if your putting thes OH mics through the PA. The plexi-shield could cause unwanted reflections and feedback problems in really small clubs YMMV. But it's hard to go wrong with the 451's (which are also a great all around mic)If you've got a budget of $1,000 to $2,000 CDN you could look into getting 4 or so Shure SM81's. You would then be able to mic things a little closer. A lot of people think of SM81's as a standard of OH's and they don't sound bad up close on a cymbal. However the more mics you add the more phase issues you could add. The SM81's are also good all around mics.
Regards,
Bob
A pair of AKG 451's and a plexi shield should do the trick....
A pair of AKG 451's and a plexi shield should do the trick....