I'm doing something wrong, because it's not working.
I create a separate track (Mono) set to input Bus 1 and outputs 1 and 2. Then I call up the tracks I want to reverberize and have them send to Bus 1. I option click the little wheel that shows up so I get a send attenuation of 0dB. On the reverb bus I get rid of the dry signal and adjust the wet to the desired level, except I hear nothing.
Side question, can you use more than one plug on a single send bus?
Topic Tags
Comments
Nahh, not the whole thing, or else I would just lay it on the ma
Nahh, not the whole thing, or else I would just lay it on the master track. Just say every guitar track. Or every vocal track. Hence using sends, as it is more convenient than tweaking each individual track then copy/pasting to other tracks.
Putting a variation on the reverb for each guitar track helps separate/thicken the guitars, just like pitch shifting or offsetting the peaks. More work for you (barely), but a better product in the end. Just how many guitar tracks are you doing, anyway?
every vocal track.
Every vocal track? I wouldn't use the exact same reverbs for lead and backing vox. Similar but not the same.
I used to put reverbs on every track. I stopped, not because it
I used to put reverbs on every track.
I stopped, not because it was a PITA to do it on each of the necessary channels, but rather b/c I wanted to have the L dry send to the R verb and vice versa, for stereo imaging.
Now I tend to group similar elements to the same send (like one guitar part, another gui part, backup vox - but that's usually a stereo verb). That's b/c I'm often dealing with a single guitar that's multi-miked and a single gui/key that's multi-miked.
So I often setup a Left & Right (instruments), and mono center or stereo verb (vocals) aux/fx channel in those situations.
Otherwise, unless it's really taxing your CPU, I prefer to set individual verbs.
Like anything else in recording/mixing, you're going to have to make some comprises. Unless you have a lot of $$$ or the years and knowhow to build it right.
Guitarfreak - Sounds like you are doing the right thing. What D
Guitarfreak - Sounds like you are doing the right thing. What DAW are you using again?
Are you muting the original (send) tracks and just trying to listen to the reverb track? Muting the original track will mute the send. Faders up on both the send track and the reverb track?
NCDan - Using different reverbs of different tracks makes it sound like the instruments are in different "rooms." There's no right or wrong here, but sending all reverbs to the same bus has some logic to it. Of course, reverb is one of the most cpu intensive plugins, so there is a huge savings in computing power by doing it this way.
The outputs sound be the same as the outputs of your audio track
The outputs sound be the same as the outputs of your audio tracks. Try it without the reverb plugged in just to make sure that the problem is how you are routing everything. The "reverb" track will sound the same as the track you are sending, but it should still react when you move its fader.
NCdan - Separate reverb on every individual track? Egads man. I
NCdan - Separate reverb on every individual track? Egads man. I hope you are using some good quality reverbs.
NCDan - Using different reverbs of different tracks makes it sound like the instruments are in different "rooms." There's no right or wrong here, but sending all reverbs to the same bus has some logic to it. Of course, reverb is one of the most cpu intensive plugins, so there is a huge savings in computing power by doing it this way.
I'm talking about slight variations that don't change the "location" much if at all.
It sounds like you are not routing something right, this is a fa
It sounds like you are not routing something right, this is a fairly simple task it is just DAW specific. You might be better off in a Logic Forum where you could get step by step advice, descriptions like the little wheel are just not very clear to someone without one LOL.
Well, I would say that people generally like what they use and w
Well, I would say that people generally like what they use and what they are comfortable with.
Mac is expensive and requires a different OS than what 90% of the world uses anyway. When your talking about spending more money on something like a computer, I think you'll find that people want to save money. PC's are much more commonplace so Logic is a minority.
I use LP8 and I think its great! jg's right, goto the Logic forum. I go there all the time.
You do know, there is a help tab in the software and it has all the manuals right there. Type in a keyword and more than likely you will find the answers there.
Logic Pro is very deep and its not easy to learn everything as fast as we may like.
I assume that by Logic forum you mean a different site. The Log
I assume that by Logic forum you mean a different site. The Logic manual is HUGE. even though I type in simple stuff in there I usually get good advice, but not exactly what I'm looking for. But such is the case when balancing specific information with being general enough to please the masses.
I use cubase for several reasons 1) It is sooooo much better (ju
I use cubase for several reasons
1) It is sooooo much better (just kidding!)
2)The two pro studios I work with both use Nuendo so tracks can be brought back and forth.
3)It came with the box
4)It is one of the industry standards, most of the pro studios I have been in have it or PT or both
Just in case anyone here was wondering. http://logicprohelp.com
Just in case anyone here was wondering.
Why are you adding the same reverb to every track? You can't ju
Why are you adding the same reverb to every track? You can't just add reverb to each individual track? One reverb setting isn't the best way to do it. Unless you want to put reverb on the whole track in mastering, but I only do that when my friends send me their crappy wav files they want me to somehow magically fix.