Skip to main content

Are pentium Motherboards better with Digidesign?

If I get a pentium board, will I have to get a new case?

If I get a SCSI hard drive, will I have to get rid of my current IDE?

Topic Tags

Comments

Markd102 Mon, 03/04/2002 - 11:48

G'day Stone

At this stage the Athlons are out performing the pentiums, but that's not to say it will always be the case.

Check out this thread on the DUC. It's huge, so skip to the last page to get the latest info.

[[url=http://[/URL]="http://duc.digidesi…"]Pro Tools Performance Thread[/]="http://duc.digidesi…"]Pro Tools Performance Thread[/]

Your current case should be OK, but don't quote me on that ;) They're cheap as anyway.

Yes, you can run SCSI and IDE together.

Mark

anonymous Tue, 03/05/2002 - 20:13

I'm very happy with my Athlon XP 1800+ system. It's giving me nearly double the performance on the "davec test" that I was getting with my 933 MHz PIII, and it cost a bit less than I paid for that about a year ago. HIGHLY recommended!

You may also want to look for a thread called "best PT system for under $900" over on the DUC.