Hello,

we have a problem with the supply of a TUBE-TECH MMC 1A Microphone Amplifier and Multiband Compressor.
The fuse directly blow for the 240V and 270V supply.
Is there anybody who can helps us with the schematics ?

Hello all,

Hello
I cant find any details about voltage, fuse and others electrical info for sontec mep250c
Anyone got them?
thanks a lot
Davide

i have an 80's Walker console that needs a power supply
its modular board
5-pin connector
it's says +15/-15/G/P other side of connector
here are some pics

i had an 80's Walker Mixing Console givin to me without a power supply here are some photos - any leads/help?   

Aside from stereo linking my LA-2A's, The gain and reduction knobs are different from each other. Its annoying and not a problem but I like things to looks exact and be calibrated to reflect a similar setting.
I know, no two LA-2A is alike but ... rather than lossening off the knob screws and resetting them, are the trim adjustments front and back for this?

Sometimes I build my own stuff. I have been using dry transfer lettering called "Letraset" to label the controls and connectors. I purchased it many years ago at a hobby shop. I can no longer find it in the style that I need. Everything I found was either too large or the wrong color. I prefer white labels. I searched and found some Chartpak lettering but it also was too large.

I bought 2 old Calrec PPM drivers on ebay some time ago. No documentation was included. I figured out the inputs/power/outputs & fired them up into a pair of Sifam PPMs.

I can't seem to find a schematic for the original (black face) dbx 162 stereo compressor. Any ideas on where to find one?

hi all..
i have a big problem with my ms2000r.

for the last few months, i noticed it takes longer and longer to switch between the sounds..then some sounds wouldn't play at all..

today,while in the middle of recording a track,my friend pressed something and now nothing works.