I'm getting a high pitch noise (attached) that has something to do with the pedals (also attached)
Noise only happens when going through .
No noise when plugging directly into mixer, or into Clarus, then Mixer.

Guitar --> pedals --> Acoustic Image Clarus --> A&H Mixer --> Peavey Power head

I just thought this could interest some of you..
Let me know what you think :

Question at bottom.

Channel 1 on my 223xl dropped the lows, like engaging its Butterworth low cut. But it did it all on it's own and the low cut switch operates normally. When I pushed on the faceplate on ch1 side, the lows came back, until I let off. So odd.

Hey everyone, just joined this forum and I’m hoping I can get some tips, tricks, cardinal rules, advice etc. on how to get a mix with good volume without white noise.

I’m a good writer, average musician, but virtually inexperienced with studio recording. I know I could get some great stuff out there if I could just get decent mixes.

I may have mentioned it before but after listening the Audient's, I'm pretty much sold on them. It's been almost 10 years since the eleven rack was out so I'm sure technology has got better. Audient id14 is about 4 years old?

Will my Scarlett 2i2 have enough power to play via a Home Theater?

Currently the Speak is connected to the PC.

This is very cool i think! Especially for small mix adjustments where you don't want to scroll across the entire screen, or mutes etc. Its literally like working with an assistant that doesn't require you to supply lunch.

Ok,

so who is splashing their hard earned cash for one or more of those gorgeous new over priced Mac Pro models. I’ll be getting one after I sort out moving into my bigger house, yes again.

Personally I’m going to go standard other than 16 core CPU then do my own SSD and RAM upgrades third party. I mean to say, £360 for a 1tb SSD is taking the piss for starters!.

Hi gang !

Hope you are all well and ready for the end of the year !

There is so many plugins available, let me know what you think of those and what tests would you want me to do in my next video about them..

I would like to record a local brass band in our village church . This building has some challenging acoustics .( reverb) What would be the best approach? Condenser mics, dynamic mics, ORTF, MS etc...I'm by far not an experienced soundguy but for me this is just a hobby.
The mics I have are: