Happy Holydays
No sound. I paid for a twenty dollar optical cable hoping these connections would get me a digital audio* connect. The Tascam fw-1804 won't even read a signal coming in.
Am l doing something wrong?

So, I have a bunch of ADAT tapes (mostly pairs, making 16 tracks) of unmixed music from the olden days.

I'd like to get these tracks into my computer for mixing on a DAW such as sonar,audition,vegas, etc.

Whats the best way of doing this? I no longer have the ADAT machines, but see that they are dirt cheap on ebay. I remember that they have an optical port...

iv been researching a little for expanding my recording set up. iv noticed that on the digimax fs, if i wanted to record at 96k through ADAT i would need two cables, but how would i connect that to a 003? the 003 only has one ADAT in.
i might have this wrong, I'm just curious.

hows it going,
basically i have my dishnetwork dvr digital output lightpipe which is smpte and i want to go into my motu828mk2 ADAT in.But i get nothing but high pitch static on all channels in cuemix.Then i found out that the dvr was smpte code and the MOTU is ADAT and not compatible.

Hey any help would be greatly appreciated as I need to figure this out problem soon for a project I'm doing tomorrow. I am running a Behringer ADA8000 through ADAT light pipe into M-Audio Firewire 1814 running on Pro Tools on a mac.

I have an ISA 428 and am looking at getting the A/D card. Question is: will there still be zero latency monitoring when I go into a PreSonus firestudio via ADAT? Thanks.

Currently I run out of my 428 with XLR cables into the preamps.

Justin

I've been looking into possibly upgrading from my mbox2 in the future to the Digidesign 003 rack. It has 8 in 8 out. Only 4 of those inputs are XLR but i've heard and read of getting 8 inputs using ADAT which is how many inputs i'd want for drums etc.

Hi, I have a couple Adats and 1 inch tape i need transfered to digital format. I've searched locally with no luck. Is there anyone here that could do this or can refer me to someone? Would greatly appreciate any help. Thanks

OK, I am looking into syncing my DM1000 with a new DAW and can't decide whether to purchase the MY16mLan card and be done with it, or purchase the MY16AT ADAT card as well as an additional RME 9652 ADAT card for my computer and go that route. It seems ADAT is a safer, more stable, and more of an industry standard type route, but is it worth the extra $600?

i just bought an 828mkII second hand, and until i get the 896 and a new computer, i'm just going to use the 828 as an a/d converter for all my external preamps and amp simulators. but i can't seem to get the 8 anologue ins to go out the lightpipe out, hmmm, and the module didn't come with a manual either, and MOTU wants me to pay 20 bucks to get a manual. .