Understanding Hz and kHz
Does anyone know a good resource for this type of thing? When someone says roll off 3db at 150hz or what ever I would like to know what that means, lol...
Thanks guys
- Read more about Understanding Hz and kHz
- 5 comments
- Log in or register to post comments
CRane Song Hedd 192 Upgrade-and 192kHz in General
Is the CRane Song Hedd 192kHz upgrade worth it? I know its not that expensive but I am really not sold on the need for 192kHz. Thoughts?
can u open 88.2khz sample rate project with mbox?
i tried opening a session i did at the studio, and i wasn't aware that they recorded at 88.2. is there any trick or way i can open this session on my mbox? obvioiusly if not, i'll have to go back and get the tracks consolidated etc... booo
thanks,
jeff
Schoeps CMC 6 XT (40KHz)
Hi
I'm about to buy a stereo pair of schoeps omnis. Is the XT version (up to 40 KHz) worth being bought ? Isn't it a missmatch with capsulars up to 20 KHz ?
sorry for my english guys
william
- Read more about Schoeps CMC 6 XT (40KHz)
- 13 comments
- Log in or register to post comments
8kHz Hum on DI?
I am having a bit of an issue with hum at 8kHz, but only on DI'd instruments... everything else is fine.
I've tried trouble shooting the usual hum causes but nothing seems to work. Does anyone have any suggestions as to what would cause hum at about 8kHz?
Thanks!
- Read more about 8kHz Hum on DI?
- 11 comments
- Log in or register to post comments
96kHz and 48kHz on two different interfaces simultaneously?
My system (to be):
LynxTwo B into Cubase SX3 for audio recording, and a MOTU 2408 mkII with S/PDIF I/O for outboard effects (Kurzweil Rumour/Mangler).
44.1kHz wav vs. . mp3
Hi
I recently posted this at what I now see was the wrong place. It should have been better put here: (Dead Link Removed)
- Read more about 44.1kHz wav vs. . mp3
- 12 comments
- Log in or register to post comments
44.1kHz vs. . mp3
Hi all!
I have a question that I need a sure answer to, and would need reference to if possible.
- Read more about 44.1kHz vs. . mp3
- 9 comments
- Log in or register to post comments
88.2khz + 108SNratio *or* 44.1khz + 116SNratio
i currently mix all of my music ITB @ 44.1khz / 24bit in digital performer. (please no flame wars aboout ITB).
i'm interested in bouncing my tracks down at 88.2 so when i take them into Peak for final "mastering" i can use my plugs (UAD, Sony oxford, URS) at a higher sampling rate.. and then save back down to 44.1, 16bit (pow-r 3 dithering) for CD.
recording at 24-bit and 44.1kHz - Sample Rate and Bit Resolution
Well I just upgraded to the RME Fireface 800 from my crappy Edirol FA301.
Firstly anybody searching, I cannot recommend the Fireface highly enough. The difference, mainly noticeable in the higher frequencies, and the clarity of what I can hear in old mixes that I never could before, is simply stunning.
I finally feel I am moving towards a semi-professional level.