just got a little problem with battery 3 in logic pro which is really driving me mad.

I have set up battery as a multi instrument with battery options set to have 10 Stereo and 10 Mono outputs going to logic.

Ok, Im in a jam and need some assistance. I run a 3.2ghz pentium 4 with 1gb ram and a emu 1820m card and audio dock. I have had this installed with no problems since this card has come out, routinely updating the software when it is available.

i have some Event 20/20's... and my mix is coming out with a lot more low end and flat sound than I'm hearing. My 20/20's set about 4 feet from the wall, and i sit between the wall and the speakers obvoiusly.

Hey guys

So i just picked up a PreSonus Firepod and i tried to install it but when i click instal it says "An error occured that prevented Cubecase LE from Installing" Anyone know whats wrong, i could really use some help!

I have an Mbox 2, a macbook, and a stereo pair of KSM141's. I'm getting a bunch of pops and hissing from them. I tried a different pair of 141's and got the same thing. I tried a pair of SM57's and they were quiet. I thought there was a problem with the phantom power, but I tried a pair of Avlex C131's and they were fine. Any thought?

In Cubase ive got everything set up. Im using G Player for effects and that works all fine when I go into Cubase and put it in on the effects channel in the mixer.
Then i click on monitor and record and i can play around get all the effects and play around the sound. and when I record it shows up as me playing. But when i play back i dont hear anything.

OK, here is my situation...I am running sound at a 500-600 capacity club in my area and this is my first experience in actually building and installing a setup in a venue. I have worked and assisted before in much larger venues with their house systems but never have I been solely responsible for setting up, installing, purchasing, maintaining, and running the whole thing.

My main DAW is Cubase SX3 which is running on a Dual - Dual Core 285 Opteron system, Windows XP Pro, SP2. The system also includes two Lynx AES16 Cards.

Hi,
I have exhausted every trouble-shooting scenario I can think of to get rid of a digital ‘glitch’ coming through my Tascam FW1804, while using Sonar Producer 4, and am hoping someone can help. I will describe the problem and what I’ve done to trouble-shoot below. If you have suggestions please help, as I am hours away from a service center.

I use Cubase LE and a Lexicon Lambda sound card. Most things seem to work, but I cant hear any MIDI.

The drivers to the sound card are installed.

I've set "Lexicon USB MIDI" as default MIDI in and out in Device Setup. I've also tried some different vst-instruments.
I get an out-signal, but no sound.

I just can't figure what to try next. Anybody who knows?