Hey all,
I'm trying to configure my DM24 for something that I thought it would do... I want to set channels 1-8 to be direct outs to the ADAT port. Then set 9-16 to be direct outs to the ADAT expansion card in slot one. Currently, 1-8 direct out works fine... However 9-16 outputs white noise. What can I possibly be doing wrong? A better question is; is what I want to do even possible with the DM24, and is anyone doing it?
Thanks,
John
Tags
Comments
It worked for me together with a rme 9652 Soundcard via Adat-Con
It worked for me together with a rme 9652 Soundcard via Adat-Connection switching Chanel 9 for example to "direct" on the channel assign.
Controlling the RME-Mixer-Software, i have a correct input on the second Adat-In (first ist connected to the normal Tascam-Adat-Connector)
Greetz
Headtuned
The rme 9652 is the same sound card that I have. I have no expl
The rme 9652 is the same sound card that I have. I have no explanation at this point other than there must be a problem with my expansion card. I doubt that there is a problem with both expansion slots on my mixer, so I'll start with the card. I've posted this question on several different groups, and so far, no solution. :(
[ January 11, 2004, 09:24 PM: Message edited by: John Vice ]
Hi John ! If your adat Card is in Slot 2: shift-I/o Page O
Hi John !
If your adat Card is in Slot 2:
shift-I/o Page Output
Bus1-8 /direct9-16 routed to Tdif2(1-8)/Slot1(trk9-16)/slot2(trk9-16)
Bus1-8/Direct1-8 routed to tdif3(1-8)/ Adat(1-8)/Slot1 (17-24)/Slot2(17-24)
shift-digital Page slot
Slot2 (adat card) select trk9-16
I think this should work.
Greetz
Headtuned