Skip to main content

digimax lt - clicking/clipping problems?

I am using a powermac G5 / digi002 and I am having a problem hooking up the digimax lt with the 002. I have had the unit for a few months but didn't need it until now. The digimax hooks up via lightpipe...when I arm the track in Pro Tools and select the digimax inputs the line clicks/clips - even when I don't have a mic/instrument hooked into the input. i have the sample rates matched...does anyone know why this is happening ?

Comments

anonymous Wed, 07/05/2006 - 23:21
Like TVpostSound said, you need to clock the Digi 002 to the Digimax. I have the same setup so I'm assuming that your connecting the Digimax to the digi 002 through the ADAT connection. You can clock through the ADAT cable so you don't need anymore cables. Go to Setups, Hardware Setup and set the clock to ADAT. It should get rid of your problem.

Tags

x

Register

Your recently read content