Skip to main content

Hi everybody,

I'm planning on building a new desktop.

The computer I have now is too old and it's not handling the amount of tracks and plugins required, plus my girlfriend needsa computer so this is the opportunity to get rid of it and get a new one.

I need it to record and mixdown. I'm working with two laptops with VSTis (both with M-audio 410s), guitar, bass and vocals.
All I need is a computer that can handle several plugins and tracks.

This is going to be a audio dedicated computer only, and I was thinking about:

I already have the screen, and a 002 rack.
3.0 ghz CPU
2 g of ram
2 hard drives one ATA and SAta the other
I don't need a dual head video card
and a good cooling system.

I haven't done a lot of reaserach about new mobo models and cpus, so I thought you guys may be able to point me in the right direction.

I've been thinking about going intel for mobo and CPU, what do you guys think about that?

I read the other topics, I just wanted to hear some suggestions about models, brands.

Thanks a lot

ISH

Comments

anonymous Wed, 04/06/2005 - 03:24

8-) hey ISH

Have a look at the ASUS P4C800 Delux motherboard. I plugged in a Prescott 3.2Ghz processor and 2Gb of ram. The system is rock solid, no blue screens, no hangs w/ XP home. I went with the ASUS board becaus of recommendations of compatibility with the INTEL 875 chipset with the greatest no. of known peripheral devices.

One odd feature I did on the recommentation of an assembler guy was to make my CD/DVD burner an outboard unit that plugs into the USB......you're only going to use the optical drive now and then, and this allows you to power it down so the CPU doesn't even know its there or try polling it when its not used.

ATI Radeon 9200 is as cheap as any video card and gives dual head option......nice when you've got crap spead out all over.

cheers!! David

anonymous Sat, 04/30/2005 - 22:52

If you're running ProTools you really should consider going AMD. For the last year or so AMD has been killing Pentiums in performance (with Protools), and they're cheaper. There are some guys over at the digidesign forum that test these things all the time, and they are always finding the best components.

Check out this thread. Go to the beginning to see the latest suggested configurations, and then go to the last few pages to see what's been going on recently.

http://duc.digidesign.com/showflat.php?Cat=&Number=360675&page=0&view=collapsed&sb=5&o=7&fpart=1#360675