The M7 upgrade will be a for cost hardware upgrade.

We are developing two new products. One will be a lower cost product that we are calling the M200, while the other will be our flagship M7 upgrade.

I'm mixing a project with two drummers on most of the songs, much like The Grateful Dead, Allman Brothers etc. I've been pondering my panning approach and, though I've kind of got it figured out, it would be useful to hear what others have done or think they would do with two kits before I settle on something.

Percrastinate

I'm using the MXL 770 along with the Behringer U-Phoria UM2. Now, the Behringer use to make a lot of noise until i updated a driver. I knew it was the audio interface since i disconnected the actual recorder from it, and the laptop still allowed me to record. Now after that problem is gone, i still find background noise when connecting to the condenser mic.

I recently purchased a brand new Numark Mixdeck Express midi controller. I connected it the other night at a gig to my QSC K12 speakers using XLR cables. On the rear of the controller are 3 XLR outputs that say BALANCED. I connected regular XLR cables (microphone cable) and ran it to the left and right speakers separately. I then tried to power up the speakers and they would not turn on.

Hello,

I am building some acoustic panels to hang on my wall and ceiling and as I have a dust allergy I want to make sure they are totally contained and can not leak dust through fabric. (I have not decided yet whether to build these from 2 inch 703 or 8lb density 2 inch rockwool panels.)

[MEDIA=soundcloud]kevin-white-2/happens-every-time-1[/MEDIA]

Any/all comments warmly welcomed and appreciated ...

http://recording.or…

Attached files Happens Every Time.mp3 (5 MB) 

I received these microphones with some other equipment I purchased and they all seem to have a ring where model information once was present and was wondering if there might be someone out there who could identify the Manufacturer/Model?

I'm wondering whether you always recording with Highest Sample Rate? Or... 44.1 will do?