Both are multipatten (omni, cardioid, & figure 8) with tiny switches for pattern selection, roll off, and a -10 dB pad.

The Nady is similar in construction to the Marshall V67G except with a shorter, heavier body, and a U87 type grille. The SP C3 is built exactly the same as the C1. Each had 5 transistors.

Fletcher, You just went up two more notches of 'cool' in my book. I didn't know you were a Buddy (and Julie) Miller fan? What show were you at when you saw them?

One of the weaker links in my current setup is the Samson 240 power amp I'm using to drive my Event 20/20 monitors. Not only is it, well, a Samson, but it's a mite underpowered at 120 watts a side (the 20/20s are rated at 150 program/200 peak).

I didn't know if I should post this here or at the Mastering forum. It's pretty much a bottom feeder question :) !

Guess there aren't many ReCycle users, but for those who use grooves a lot, I just wanted to ask if there's a way to have stereo groove loops matched to a Nuendo project's tempo, because stereo REX 2 files from ReCycle 2 can't be opened. Any ideas?
Capi

Our ancient HHB CDR-800 is slowly bitting the dust. Any recommendations for it's replacement. I wouldn't mind upgrading if possible.
Thanks for any responses.
Marc McManeus
marc@soundpostaudio.com

Totally willing to admit to being a cheap S.O.B. I'm purchasing an 87 next week and the mic does not come with any mount. The Neumann EA87 elastic mount seems really nice, but its also $75 more than an RNC stereo compressor! If there is no decent alternative, I'll shut up and write Neumann a check.

For use with Pro Tools Mix+ mac, 10k rpm drives, ATTO dual scsi... (same ones used by Glyph)

Any new developments with this hardware? Other manufacturers competing (making compatible chassis')?

I plan to put a couple new ones together soon, and need to brush up on the process. Anyone care to do a walkthrough?

Someone who has tried both can tell me which to pick? I'm recording loud rock music most of the time.
Or just give me opinionson each!
Thanx!

Hey,