Skip to main content

My first production recorded almost entirely with home-made ribbon microphones

Hi, DIY fellows!

I have finally fulfilled (at least, partially) one of my quests - to make a recording based as much as possible on DIY ribbon microphones. Factually, everything in this mix except drums and line-in instrument (bass & keys) is recorded using only a pair of such ribbons. Drum group is equalized (HF roll-off) to fit organically with ribbon tracks.

Seeking your advice on Micing a mandolin (live)

Hi, this question is for a live performance. I play a mandolin and am interested in a high-endmountable condensor such as a DPA 4099. Planning to use a wireless body pack, which I'd plug into a stage mixer. Here's my question - I'd like a foot switch to attenuate the signal depending when I'm not taking a lead. I guess I can buy stuff and patch it together, is that what I should do?

static from hats mic

hi folks - ran into a strange problem.

recently simplified my drum recording setup (down to 2 dynamics snare and kick, 2 condensers on 2 toms and one large condenser for the room, but focused on the ride).

i wasn't getting enough hi-hat so i stuck a 57 over there (i like less sizzle from hats than a condenser provides).

x

User login