Skip to main content

Logic audio buffer help requested.

Ok so i was sitting in on a logic recording session and i remember the engineer saying

" You will have to change the
buffer settings in logic audio preferrences in order to record "
as i was taking in a thousand other studio quirks and rooting paths etc i was only half on the ball... i know terrible hey.

My question is firstly

UA Logic UAD-1 or UAD-1e for New Mac Pro G5?

The resaon I'm asking this is two part. 1. I'm currently running Logic 5.5.1 on PC and will soon be moving to Mac to upgrade to the latest version of logic but I want to buy a UAD-1 now to use on current projects. 2. As I have to buy the UAD-1(pci) to work in my current system, will it work also on the newest Macs? Or do you have to purchase the UAD-1e(pci express) for the new Macs.

Good compressor/limiter plugin with Input Gain? Signal Chain

I am looking for a good Compressor/Limiter plug In for mastering.

One kind of like Sony's Wavehammer with these options.
Options:
Has an Input Gain fader(Wavehammer does not)
Allows Peak and RMS Compression
Ratios up to 50:1 or higher if possible.
Offers a Limiter to limit the Output

Sync issues. software or harware problem.

I did some searching and didn't really find anything that matched my setup/problem. I was using an 828 along with a Mackie CFX-20 for the pres/monitoring for the longest time, until recently I upgraded my computer to a home built. I also upgraded my interface to a MOTU 2408 mkIII PCIe and removed the mixer from the equation. I picked up a used Focusrite Octopre and installed the digital card.