Im unsure of these cables i made for connecting balanced outputs of my mixer(TRS) to my crown power amp in(XLR).

I wired them this way:
pin1=TRS ground
pin2=TRS tip
pin3=TRS sleeve

This is a link to my blog, in case any body wants to try this simple circuit ...out let me know. I would love some feedback. no pun intended;)

recording.org/blogs/link555/217-re-amp-box.html#comment519

I am about to bid, and hopefully buy a Pioneer RT-1020L. Now I have little to no experience and knowledge of recording on tape, but am ready to learn. What i am really wondering is how I would hook it up with my PreSonus studio live 16.4.2 mixer? Also I was wondering if anyone could give me a brief overview of how recording to tape works, or a website where I can find information? Thanks

Here are some "hero's" of audio design...
Rupert Neve
http://www.youtube.com/watch?v=pm4Dqv0NRHA
http://www.youtube.com/watch?v=9WR3OfNIpns&feature=related

Hey Guys! Greetings!

So...I recently started back in college,..and Im going for Electrical Engnring.

I have a PalmTrack portable digital recorder but the line in is far too sensitive and I get lots of level peaking. Is there a simple inline gadget that can be used to reduce the level?

Ben

I want to create a switching system for my monitors with a three position switch so that I can instantaneously switch to L speaker only, R speaker only, or both. I have scratched out a drawing using a DPDT switch but come to the problem of having a mono output using this setup. I am assuming this system would require the use of a 4PDT switch because of this. Am I on the right path?

If you have a 9v voltage supply and three transistor gain stages, does each stage see only 3v on the collector?

Anyone here a CCS fan?

Just picked up their PCHWD C complier. So far its a nice package. I am starting back into the world of micros after a 2 year break. So I figured I would start simple. I am making a meter board that I can use for all my toys.

BYOC. Build your own Clone?