i'm using a Yamaha EMX66M 600 watt powered mixer w/12 in Peaveys...4pc live (i'm not recording) rock band w/vocals only going through the mixer/pa. any rule of thumb as to eq settings on the graphic equalizer? (i.e. add some freq "X"/or cut on freq "y"). and what are the sweet frequencies to boost for fullness and the "in frontness" that vocals need?

Hi guys i just can't figure out how can i fix it, every time i plugin any tracks the noise start,even if i stopped the track the noise goes on.

I just purchased a Ashly pqx 571 and I am running a delta 1010 a/d converter. I currently have the output of channel 8 running into the ashly and out ashly into the input on channel 6 of delta so that I can moniter and try to eq the track. I have the delta patchbay set up with 8 out and 6 in. I am getting sound but the problem is that it is a very low level.

I just borrowed a Marshall JCM900 head with 4x12 cab to record some death metal guitars and I want to add my Boss EQ pedal to the mix to alter the sound. Is it best to add the EQ through the effects loop or through the normal input? Any suggestions on how to set the EQ pedal and the amp EQ settings? Thanks!

I'm looking for a plugin for Pro Tools that is very visual type eq, I want to be able to not only hear the changes I'm making but see the bars jumping at the different frequencies and adjust them, what do you suggest?

Hi there,

Anybody know this unit? Any good?

I know this is a very subjective question, but what is a good starting point for Q on your EQ? I usually start around 2 but am not getting the results I am looking for.

Hi there again - yes yes yes - sorry to be asking so much.

What I am doing right now is creating a live set which shall be pre setup as I am using a digital desk and a sequencer as well as loads of live instruments. Therefore I am pre mixing for a live situation.

Hi,

anybody got some good tips on eq for a diguital piano in a live and in a recording situation? The pisno is actually coming from a sampler and is quite a nice sound. I've been told to roll off below about 120 hz and add a little boost around 10khz. However I'm not sure if this is a general setting and I'm not sure of the levels of gain and attenuation as well as the q shape.