Hello,

Hi,
Attached mp3 was showing the NOISE that I was/am facing during recording section. What was that issue and where was it come from, still, how to solve it?

Recording setup:
MacBook Pro
USB Audio Interface
Mic XLR input
Power supplies from the same source

Hey everyone!

Hello, I've recently purchased some cheap budget recording equipment just to lay down some demos and what not. I have the Lexicon Alpha, Cubase LE5 that came with it, and a dynamic mic. I plug the Lexicon in and turn up the line 2/mic channel, I hear a faint high pitch ring. I plugin the XLR for the mic into that channel and it gets worse.

Hello i am getting into streaming and i have ran into a problem when i try to stream footage the audio has a load of background noise and i haven't been able to fix it. I have tested my microphone on REAPER and it works flawlessly. I am running a Superlux E205 high diaphragm cardoid condenser microphone that is going through a Tascam US-122mk II Audio interface

Audio samples:

Hey all, this will be my first post on the forum.
I seem to have a problem with static/white noise. even when my mic is muted on my Behringer x2222. My mic is an AKG P420.
The white noise always shows up when I normalize a track, whether I'm recording nothing or my guitar or voice. I'll put up some pictures of my configuration too. Thanks for the help in advance!

So I recently got a new computer and installed all the same equipment onto this superior computer, however I have been recording issues. I keep running into a strange cracking noise that appears randomly in my audio, its not from any outside sources and I turned off my anti-virus and has not worked. When testing this issue i have to keep recording for around 3-5 minutes until I hear it.

I bought Behringer C1-U microphone and I would like to ask about this noise I get when recording. You can hear the noise in this short recording https://drive.google.com/file/d/0BxEYfpSTfDGJTTRDOEpMWkpTdGc/view?usp=sharing My question is, what causes that noise.

Have an older Mackie analog 8 Bus 8x2x2 board that has random computer noise occurring. Little 1/2 to 3 seconds of random frequencies, very low volume, but showing up on 1-2 LED segments across all 8 channel meters and the L/R as well. Definitely something internal to the board or external power supply. Not coming from any specific channel or inputs (have muted/disconnected everything.

Hi

I made a account here because I can't find help anywhere else.

I have had microphone problems for about a year.
When I touch computer case the noise isn't so bad but still exits, and when I move microphone in some positions the noise changes little bit. Time to time it was so bad that mic didn't pick my voice at all. Sometimes it was like helicopter...