Im thinking of gettin a pair of AA151and a pair of AA15HL both 400watts at 8 ohms for FOH and a pair of JBLPro JRX112m 250watts at 8ohms for monitors. what power amps do i need to be looking at?

What is the performance of MC2 audio 1250 power amp compare with chord SPA 1424 - Mono and FM acoustics FM 811 MKII power amp?

Is it suitable for mastering studio ?

http://www.mc2-audio.co.uk/mc1250/

I thought it might be a good topic to discuss amps.

I know a lot of guys use Bryston, Rotel and McIntosh. But what else is out there? What are the advantages of different brands in comparison to the others? What are studios like Sterling Sound using?

Go into detail on your opinions on power amplifiers, if you would.

I was looking into getting passive monitors. I would need an amp for them. Does the quality of amp have any effect on the monitors?

Hi all,

I've got a stereo power amp which is 250w per channel RMS at 4ohm;planning on using it after a guitar preamp in the signal chain

I've also got a 4 x 12 400w guitar cab; it's wired so there's two inputs, one 8 ohm input for the left two speakers (200w), and one 8 ohm input for the right input, of the same power.

I was hoping someone could help me decide on which of these 2 heads to get. I will only have enough cash for 1 at the moment.
Mesa Boogie Bass 400+
or
Ampeg SVT-2PRO

Hi everyone. I'm in the market for live performance (weddings etc.) power amps. Carvin HD 1800 ($349) would be ideal. QSC carries its 2450 which runs for I believe $599. $400 is the most I can spend. How would you campare quality and durability of the two makes? Please elaborate on the subject. Thanks.

Currently my band is running yorkville AP 3400, and AP 4040. The 4040 is running the subs and the 3400 is running the mid/hi. We are looking to get a new amp and I was wondering what would be some recomandation. We are planning on swapping out the 3400 and using it as just a monitor amp and getting a new amp for the mid/hi. We are looking for a better sound from our mid/hi's.

Hello, I need some suggestions on an amp to power my JBL lsr32 studio monitors.

http://www.jblpro.com/pages/recording/lsr32.htm

I am a novice and any help would be great. Looking to get the job done without spending too much. Thank you! -matty

Hi All I am looking for a power amp for a pair of PMC LB1s They are rated at 60 - 250w at 4 omhs.

I have about £300 to spend should i be looking for a Pa power amp - I have seen a crown geodyne 500w for £250 or should i be
looking for an hi fi amp. I know to stay well clear of samson for sure but any suggestions would be appreciated

cheers
Chris