Skip to main content

Hi there, I am having probs with routing my out board fx to my 002.
I have a Soundtracs Topaz console 32 ch, urei compressors,roland tape machines, a fairchild reverb unit & a ANT w695b eq + a host of other
analog equip.
Want I want to do is use my original tracks and re record them in realtime using my effects as we produce dub style music.

I have 8 ins & 8outs routed trough the desk. Ive tried different scenarios like inserting and using the aux send rtn on the desk.

Cant figure out how to get the signal source (protools) through the desk-fx then back to re record into Pro Tools. I hope this make sense?
Can anyone suggest some other ideas?
Thanks

Kyah

Comments

anonymous Mon, 06/06/2005 - 05:40

Make a AUX track (stereo as example), set input let's say to stereo
bus 7-8. Set an insert to I/O 7-8. Connect Digi outputs 7-8 to Fx
inputs, Fx outs to Digi inputs 7-8. Now, send the track you'd like to
process to bus 7-8. Assign the output of AUX track to audio stereo
track 13. Create stereo track 13, anable record and go ...
Another good idea is to read PT manual, it's all there...
Costy.

anonymous Tue, 06/07/2005 - 16:04

I tried that but I couldnt get it to work, but what I did do is
use the aux send/rtn on my desk but sent the rtn to the input
on the corresponding channel to digi. Then opened up an audio trak in PT, and sent the source to be processed to that track. Seemes to have worked and I can manipulate the eq & use delay & reverb alternatively or at the same time. Thanks for your help i worked this
out from your description.
cheers
Kyah 8)