Took some advice and went easy on the compression this time. Thanks!

https://recording.o…

Attached files Bellevue mix in progress.mp3 (8.8 MB) 

Hi guys!

Is it possible to use an Yamaha MG10XU as a controller for logic pro?
If so, can someone tell me how can i configure it a MacBookPro mid 2011?

Thanks in advance!

Cheers

I'm thinking of what my next move should be as far as putting my new basic rig together, besides the seemingly endless computer parts. right now I'm rocking an Avid eleven, and Focusrite scarlett solo interfaces, and Alesis monitor one speakers, with an avantone on the shortlist, and a Bose home theater, and various Bluetooth and computer speakers.

After a successful time with Kontakt player, I decided to go for this package, which seems to be on everlasting sale, and frankly, I wasn't expecting much as I don't have much use for modern stuff - and the collection is packed with synths and drum machines and weird sounds. However there were enough things I'd find useful so I went for it. 115GB later, I thought I'd have a go.

I'm shooting an instructional video with a guitar, voice and piano. Sound is live, i.e. no headphones. Guitar and Piano come out of the speakers, but the mic does not. I have a RODE NTG-1, but no matter where I position the speakers, the RODE picks them up, a lot! (trying to position the speakers in the dead area of the polar pattern appears to do nothing).

I was fooling around with mastering again with some new gear and I took on this little rap snippet. Technically it was not ready to be mastered but I wanted to chomp on it anyway. I also did this with headphones so my reference is probably a little off.

What I did EQ wise..

Hi all,

Working on an Alternative Rock song idea. Here is the complete initial mix draft. Feedback welcome on what I have so far:

[MEDIA=soundcloud]jonathan-linton-3/reality-rev3[/MEDIA]

REALITY
(Words by Jonathan Linton, Music by Jonathan Linton)

You’re mystified
Why they can’t see
Your point of view
Your reality

Does anyone know of any sample pad devices that I can connect to my SP-404sx. The idea is to use this sample pad to trigger sounds from the SP-404sx.

The sample pad doesn't need to have the capacity to hold sounds, it just needs to be able to be used to control the SP404s pads via MIDI.

Ive seen the Sp404 controlled by MIDI here:

Here are the dimensions of the room I need to set up as a studio (pic link attached below). 10' 8" x 11' 10" (8ft ceiling)

I have 2 KRK Powered Rockit 6's

Can someone please tell me the technically proper dimensions I should place the speakers in the room, for the best flat response for the engineers seating position.

this is a pretty cool video, even if it is a promo. glad people are gonna be informed about this great technique! i hope they end up trying the technique, and not just going the plugin route only.