I've asked this all over. First this is what I have:

Cubase VST 5.0/32
Tascam US-428 souncard
Mackie 1202VLZ

My Tascam outs feed a stereo input of the Mackie...The ALT 3/4 outs of the Mackie feed the Tascam.

I'm considering a purchase of the new Sony DMX-R100 and I was wondering if anyone had any opinions on it? Thanks.

Im looking to get a decent used 24 channel console in the under 7k (preferably 5k) range. Mic preamps arent all that important but the eq's have to be good. How are the Tac scorpions? I saw one online the other for a very nice price. Any suggestions?

i was talking to this engineer ray [vinyl guy @ sterling mastering], and he told me you could do a m/s config. stereo setup with the cardiod as M and a sideways omni as the S [not a bipolar!]

i want to try it, but how does it work? phase wise and all that nonesense? how does it sound?

thanks.
--o

Hiya.
I was wondering if anyone ot there has had any success at recording 16 channels of 24/96 at once? if so what were you using?

i'm hoping that for this a minimum system would be a couple of ATA100 drives (7200), but can anyone confirm this?

Cheers

I havent been able to find out much about this mic builder. especially his L251 any comments or info would be appreciated.
Thanks, rrrrrrrr

Hi All,

I just got a pair of 603s' today. I am very excited to try recording with them, but I have a few questions already.

1. Why does it say Mogami under the 603s logo?

2. Why is the bag that it comes in just a 1/2 inch too small to accomodate the mic with the clip attached?

3. why is there a camel on the zipper?

Thanks,
Ken

I was wandering if someone has tips/literature on how to modify/maintain small consoles. I have a Tascam 2524 and I want to clean it, make sure everything is OK insde the board, wires and stuff... and if possible, make it better...
Thanx for any help! :)

Are any of these good? Quite popular here in Norway in the 80`s, but I haven`t seeing them mentioned here often. .

I have 2 44BXs which were both rebuilt and blessed by Charlie Gand before he passed away. They've both functioned well for years. In my new studio I seem to be in a substantial 60Hz EMF field (I think from the high voltage running down the street outside). Both the RCAs hum (which I can null out somewhat with position) but one is much louder than the other.