advertising our recording services online
Forums
In this era of the WWW how do you advertise?
- Read more about advertising our recording services online
- 26 comments
- Log in or register to post comments
Help choosing amp for Tannoy System 12 DMT II
Forums
I recently purchased a pair of Tannoy System 12 DMT II speakers to use in a home studio. I'm now looking for an amp. The speaker's specs recommend an amp between 50 and 300 watts per channel (8ohms) but suggest strongly on erring on the upper end of the scale.
Please help! Problem with Superior Drummer 2.0 + Reaper
Forums
I Have a problem with mixing in SD2.0. In mixer panel, when I set the EQ, filter, compression...by the BUS panels, but It's nothing change by the voice.
I see some tutorials on yuotube, I make so the whole thing.
In reaper right click, insert virtual instrument on new track, and select on SD2. In reaper by all track (except the first), I select on record output (stereo).
Alta Moda Audio releases the AM-30 Preamp module
Forums
The Alta Moda AM-30 is a fully discrete, class A transformer-less design unlike any other preamp on the market. Clean at lower settings, the AM-30 can be pushed and smoothly over-driven where other preamps would harshly clip. The AM-30’s high headroom and DI input make it ideal to warm up previously recorded tracks or loops.
- Read more about Alta Moda Audio releases the AM-30 Preamp module
- Log in or register to post comments
Newbie Control Room Acoustic Treatment help
Hello everyone, my name is Gianluca and I'm writing from Italy.
I turned a basement into a recording studio, but I need a hand to the acoustic treatment.
Floor, ceiling and walls are covered with wood. Under the wood there is a layer of lead, polystyrene and moisture resistant material.
The dimensions are:
Length: 4m
Width: 2.56mt
Height: 2.7 meters
- Read more about Newbie Control Room Acoustic Treatment help
- 20 comments
- Log in or register to post comments
Cubase 7.5 Problems
Gear suggestion...
Forums
I having been recording guitar with two sm57's through an audiobox 22vsl with Audacity. For voice I have been using a RODE NT1-A. I have around 600 dollars to spend, and am interesting in simply increasing the sound quality and clarity of my recordings, especially for voice.
- Read more about Gear suggestion...
- 11 comments
- Log in or register to post comments
recording speech while Skydiving
Forums
Hi all, I am new around here.
First a quick who am I.
I work for a local radio station in Queensland Australia, I am the Drive producer. I have always worked in sound somehow or another, growing up I taught guitar at the local music store.
My question is, I am fairly new to recording sound outdoors, and wind is becoming a real pain in the backside.
- Read more about recording speech while Skydiving
- 3 comments
- Log in or register to post comments
ADAT Spec confirmation
Forums
Hi,
I just need to confirm a thing
1 ADAT input/output can deal with 44.1khz and it takes two to run 88.2 or 96khz right ?
I ask that because the specs of the M-Audio Project mix says it can do 88.2 and 96 but It has only 1 input and 1 output.
am I wrong ?
- Read more about ADAT Spec confirmation
- 3 comments
- Log in or register to post comments
SPL PASSEQ hardware version? any users out there with an opinion?
Forums
been hmmming and hawwwwing over this for about year now I'm looking for another passive eq, i have a minimassive and a massive passive i find those two worlds apart. the massive has serious heft and i find it coloured in a good way but doesn't work for everything. the mini is my favorite eq bar none its just quite limited. any one use the SPL PASSEQ for mastering duties.