In for a recap and retube and a few modifications. It’s missing the memory module. so it will need some thinking...     Looks like a nice build so far..

Hey everyone,
Here is a second song we recorded off our new album Starchaser. Would love feedback on the song, mix, etc.
Thanks for your time

Hi All!

Would love some feedback on our mix for a song we made recently called "Wild One".

Wild One - Soundcloud

This baby came in for a little inspection this week. The owner was worried that it was a ticking time bomb, as the start sequence would randomly take longer some days and not others. He mentioned, when cold, the unit could take 7-to 15 relay clicks to start. When warm and operating normally he would hear 3-5 relay clicks.

I had been using a profire 2626 for the past 12 years or so. I switched to the Behringer UMC1820 because it plays a little nicer with Linux.

The Behringer seems to have more low-mids in the output than the Profire 2626 did. It's a little off-putting to my ears. I was very accustomed to the old sound. I'm hesitant to call the Behringer muddy in comparison, but it might be.

What Brands, models, Types are you using/aware of?

I thinking about designing something for myself, but I am curious what other people are into.

The obvious advantage of this is the engineer gets to stay in the control room to fine tune the mic placement...

I am Interested to hear your thoughts.

 
In this video, I'll talk about different activities, expectations and how to plan ahead the evolution of your studio.

Let me know what you think !

Hi all,

I'm repairing a couple of 7602 MkIIs, each with their own problems. Does anyone have experience with those or maybe even have access to a schematic or service manual? I have looked at some Neve 1073 schematics, since it's supposed to be a clone of those, but there seem to be enough differences outside of the tone circuitry that they're not terribly helpful.

hello everyone I have problem with my nakamichi bx-1 tape deck it is 2 head system.
with following problem topics.
1. left channel has a louder than right channel after recording. (it same with new cassettle)
2. how to adjust bias.
i don't have any tools to calibration a tape deck.
can should i do
(i apologise for broken english)

I’ve got two sets of monitors for a/b purposes... one decent set and One crappy set. Commercially mastered tracks sound good on both. . my tracks sound good in the decent set but overdrive the crappy set. any thoughts on this?