I am new to the computer recording thing and I need some advice. Can somebody lay it down for me? Logic Pro Seven looks great but is it worth the price? is there that much of a difference between logic and Cubase? I will be using a firepod.
any help would be great
thanks
garrett

Hope this is right forum for this hopefully easy question. - Using Cubase VST24, and wavelab. I have the edit preference on Cubase set up to go to Wavelab with a double click on the audio wave. The problem-- with a composite track (3 or 4 punches), only a section of the wave will export at a time. I have glued the track together.

Hello there! I'm new to the forum. I'm having a problem with Logic Express 7. Here's what I'm using:

1) Powerbook g4 running Tiger
2) Tascam US-122 Audio-Midi interface
3) Roland JV-80 keyboard

Hey all this is my first post here and i think my problem might be rather simple to some but id like to make music since ive been fumbling with a few issues with logic express 7 for a few days

I haven't encountered this before but when I recently bounced a mix down from 24/96 to a stereo file at 16/44.1, what I got back didn't sound like what I was bouncing (i.e. levels, certain EQ didn't seem quite the same). I was using "convert after bounce", "best" quality to a stereo interleaved BWF file. Any ideas?

I'm currently on a dilemma.

I'm tired of my digi001/Mackie 1604 vlz combo. Over the years I've been buying nice microphones and outboard gear, like C414's, PreSonus eureka, etc.. and I've also been upgrading my studio in terms of acoustic conditions. The main system is just not doing it for me anymore..

Alright, so I got a pair of HM-1s after reading all the positive stuff about them on the forum and they sound awesome when I use them with other mics (like in the back of a guitar amp w/ a 57 in the front).

Ok. I've posted about this before, but haven't done anything yet, other than buy this old tube amp. The unit was pulled from a Zenith mono record player cabinet (circa 1956!). The guy I got it from re-capped it, replaced the weak tubes, and converted the ins and outs to 1/4" jacks. The amp is 15 watts.

hi there,
i just got Cubase sx3 and i am already having problems.

i set up my buses
in the lefthand side of the mixer section where you can see your input buses the VU meter registers the appropriate audio signal
ie. stereo bus 1+2 is recieving the audio from hardware in 1+2 on my soundcard

i was told by the webpage the manual and some clever guys that this could NOT work. .

but it does. .

just tried it yesterday... a powerbook 1.5 GHz as host. and two Mac Mini's as nodes.

more than 3 TIMES THE POWER! (of my powerbook)

it only works on logic's own plug's. but they have a fine collection going on...