I have a question that may be stupid but is definitley confusing me.

I have a Q10 with Cubase SX. In the Q10 manual, it states that prefade in the Q10 mixer allows you to monitor the sound level coming into the sound card, independent of the fader position, where post-fade is the sound going into your DAW software after the fader.

I'm going to the studio to record my sax. To cut down on studio time, can you give me some suggestions on which setting to use for the Avalon 737 Preamp? The engineer doesn't know. I'm looking for a warm sound..

I'm using a AKG 414 mic

I'd prefer not to guess at a setting in the book.

Ray

I've been recording for about 3 years. For a long time it was more of a hobby, just recording into a standalone Akai DPS16 console. But this past summer I got a Digi 002 and it opened up a whole new world to me. I have been doing a lot more recording and have even had clients in.

if not, then what

what output on my Behringer pa (or any pa) goes to the headphone amp?

ive got speakon outs for main pa's and monitor 1/4 outs, RCA tape outs and ins

could i hook up the ha4700 from my tape headphones outs, keep the pause/record/play down.

thanks

hi !

i'm korea musician .

i can't speak english..sorry. .

mic preamp or inst pre. dual !. .

i think. Vintech 1272 or Avalon ad2022. .

i'm wondering what to buy.

or

i want your opinions best recommendation

within 3,000$ please. .

:roll:

Is this a good PLEXTOR burner?
datavis.com/product.jsp?prid=10041

Just in case you are considering some cheap headphones for tracking:

I ordered 2 pair of More Me headphones on Monday. got them today. awesome...really fast turn around time! They sound like poop, lack isolation, but are loud as hell and I don't mind a pissed off guitar player throwing these instead of my Sennheiser headphones.

Hi All!
We've been ready to print the CD inserts for our 1st release.
Luckily we found out first that the stores won't take it w/o a barcode.

After much thought about buying a single number off of the internet, I found out that I have a friend w/ a UCC membership. Who graciously is allowing us to use one of her numbers.

I have heard rumors lately that ADAT lightpipe is on the lower end of the quality spectrum when it comes to patching digital audio signals.

Anyone heard the same?

Are any of you using ADAT transfer during your projects with satisfying results?

Hi all. Am looking at upgrading my monitors and am deciding between ADAM P11A and the KRK-V8II. I know that in the end it comes down to your ears and personal taste, but does anyone have experience with either/both of these systems?