I just purchased the trident s20 dual mic preamp, and when i hook up my Neumann 103 it sounds great. One issue is when i push the phase reverse (only running one mono mic) the response seems to change (mostly in the low end). I tried other mics and got the same results. Seems like the condenser mics vary the most.

First off, hey guys, I'm new to this forum. I hope I'm posting this in the right category.

Any help or suggestions would be greatly appreciated.

Here's my problem:

I'm actually a graphics guy, but unfortunately my workplace lacks a decent audio engineer, so (amongst other positions) I attempt to fill the position from time to time.

hey,

This cool effect involves recording, for example, a vocal source, then processing it backwards with reverb (?), then somehow putting it all back together (?), and thats where I'm confused.

How would this be done on a Hard Disk recorder ? I do have a sampler too...for doing the backward thing -

Any help Appreciated,

S

Hello, all.

As I continue to struggle/experiment/learn how to get the sound I want from my mics, pres, and oh yes, voice, I was inspired to try something new (to me) and it kinda, sorta, works. I take two tracks (recorded with different mics and pres), eq and compress both so that they sound as good as I can make them, but neither one "just right".

Does anybody know about a rack mountable unit that will provide phantom power AND phase reverse switching functions? My Aardvark Q10 does not have phase reverse capability.

I looked at the Little Labs device, but it is not what I'm searching for, plus the price is too high. I need a rope and tire solution, not a gilded lilly.

Hi.

Mixerman.. Oh, mixerman..! I bought all this gear, and.. and.. I layed a lot of tracks, real good one's... and they all sounded great.. and then I played them all together and they sound like.. little, you know? Everything became unimportant, and little, and WAY back there in the bayou, kinda.

I've got a Soundcraft Ghost console which doesn't have a phase reverse on the tape returns or line inputs. My tape returns are normalled to the board so I decided to wire up some phase reverse points on the bay to use with the insert points. I can't seem to get it to work.
Is it because my insert points are unbalanced?