Skip to main content

I'm planning on building a PC and eventually running a Nuendo Setup on it, as I am currently running PTLE and am not happy with it.

But I'm not sure what interface to get for Nuendo.

I would like to be able to take up to 16 inputs (But I can live with 12) at 24/96 with decent conversion. I already have an Apogee Rosetta 2 channel AD which I plan on using for all my critical conversion needs. However to use my rosetta at 24/96 I have to use AES/EBU, so I also need my interface to have an AES/EBU input aswell.

Any suggestions?

Comments

anonymous Sat, 10/09/2004 - 17:19

inLoco wrote: budget?

I'm in the $1500-$2000 range.

Audiogaff wrote: Any of the RME stuff is pretty rock solid and works great with Nuendo or Cubase.

Just looked at the Fireface 800, looks good.

One thing I'm confused on though;

RME says "the fireface can go up to 26 analog i/o's using two additional additional ADI-8 DS."

What's ADI-8 DS?

The only thing bad about the Fireface 800 it that it doesn't take AES/EBU via XLR. :(

AudioGaff Sat, 10/09/2004 - 21:34

What's ADI-8 DS?

That is RME's 8-chaneel A2D D2A with ADAT optical to interface to the Fireface.

I just got their 24-I/O ADAT optical PCMCIA and breakout box to run soon under the new Cubase v3 and re-explore computer host based recording rather than the usual outboard multitrack recorder type recording.

Mario-C. Sun, 10/10/2004 - 12:20

MOTU HD 192, great deal for the money ... great sound, great metering, don't know how it plays with PC's but with Macs and DP it's great, very solid and the no latency monitoring comes in handy too ...

I would agree with Fletcher about the Lynx card too, a friend just installed one in his studio and its excellent

johnthemiracle Sun, 10/10/2004 - 12:50

i'll probably get a fireface for the sake of having as many inputs as possible and being as flexible as possible (it's got 26 ins). i cannot say much about interfaces since i haven't had the opportunity to work with too many. i have worked with the motu 896. it's not bad but neither the motu with mackie pre's nor the motu with its own pre's struck me to be significantly better than my old mackie combined with my trusty am3. i know, they're 24bit converters, but i'm not really excited. it's ok though.

what i hear and read is people compare rme interfaces to apogees, which are supposed to be excellent (can't verify that, haven't heard yet) and i read people saying that motu's converters are not _that_ good. and now fletcher chimes in with lynx (which doesn't move me either since i need a firewire solution for my ibook). m-audio i don't want to touch because i disliked the pre's sooooo much. and they've got too less channels.

i know rme are using the next-to-latest akm converters, so that's kind of an industry standard, i'll let you know if i think that's audible as soon as i get my hands on a fireface. take it easy, y'all!

sdevino Sun, 10/10/2004 - 14:40

RME seems to make a lot of people happy. Bob Katz also gave the Lynx stuff high marks on another forum recently.

I personally like Frontier Design stuff a lot. I have had the opportunity to meet the founders and engineering team and they are rock solid people and engineers.

Check them out at AES they will have some pretty cool new gear that I am sure many of you will find really useful.

Steve

Hemophagus Fri, 10/22/2004 - 02:49

RME-Nuendo

Well, I've got a Nuendo system based and Steinberg's staff recommended me to use their own nuendo/steinberg interfaces, they told me also that those interfaces are made by RME for Steinberg, so RME and Steinberg interfaces are the same.

I owned for long time two HDSP 96/52 and they were fabulous!! But I've had a robbery two months ago and now I'm going to buy another two... I'm taking a look on lynx cards too...

The fact is that the HDSP 96/52 are ADAT based interfaces, but you could take a look on the RME MADI card. Its more powerful than the HDSP 96/52.

anonymous Fri, 10/22/2004 - 13:06

I audtioned the Lynx2 cards, RME (nuendo's own), Motu HD192 and the Rosetta. The Rosetta was the best but only just marginally a head of the Lynx and I mean a miniscule amount here. The Lynx was much better than the Motu and the RME. The RME and motu sounded pretty much the same but the RME srivers were significantly more stable than the MOTU (PC).

Overall sound for sound quality the LYNX 2 and APOGEE are seriously good. Price wise the LYNX won it for me. ANd the drivers are ROCK solid in my Nuendo rig. Downside - not enough I/O since my PCI slots are looking fully booked.

Blenn

anonymous Sun, 10/24/2004 - 06:02

Nah - the L22 only gives yoyu 2in and 2out. I have the lynx B which gives me 2 in 6 out. Now if I wanted say 8 in and 8 out you would have to get 2 cards. Lynx 2 that is not the L22. I have 5 pic slots in my pc and 3 of them have UAD-1's 4th has Lynx 2 and 5th has the LYNX AES8.

What everyone in the Lynx community is after is a single firewire card that can take upto 4 breakout boxes with each having 8in and outs giving a total of 32in and 32 out analog. Basically the same as the Apogee rossetta!

Blenn

anonymous Sun, 10/24/2004 - 15:13

The L22 will still only give you a physical 2in and 2out of AD/DA. The adat card gives 8or 4 digital i/o depending on the sample rate you use. You can of course use something like a digital desk to with it's internal AD/DA to send via the Adat card but the AD/DA is what's in question here. You see the Lynx cards do this so well that it is up there with the likes of apogee etc. Most digital desks under 10k are not as good.

I am praying to see if Lynx have a solution to this by AES on oct31st

Blenn

omaru Sun, 10/24/2004 - 18:54

Ah yes - the converter problem. Serious money in that area for multi channel.

Thanks again Blenn - good info.

If nothing's new on the Lynx horizon I'll probably keep my LynxOne and go for the L22 with ADAT and Behringer AD8000 (for recording that requires more than 4 channels at once).

cheers

omaru

x

User login