Tascam DR-100: Built-in speaker not functioning?

mercurycinema 19 July 2011

Hi colleagues:

I just purchased a Tascam DR-100. Seems like a good unit as I'm going over the manual and doing some first tests. But my manual didn't come with a troubleshooting guide to answer this potential issue: The built-in speaker doesn't seem to work. Headphones work fine, though.

I double-checked the following:

1) Speaker switch is set to ON
2) Headphones are NOT attached
3) Playback volume is OK based on headphone test

I'm wondering if I'm missing a step somewhere in the menus perhaps? Has anyone else had a similar problem?

Thank you!
Roman Koenig

Topic Tags

Comments

I have the exact same problem with my tascam dr-100 someone ple

indraganzo Tue, 12/13/2011 - 02:20

I have the exact same problem with my tascam dr-100 someone please help ?

The speaker is muted during recording and monitoring prior to re

Boswell Tue, 12/13/2011 - 03:24

The speaker is muted during recording and monitoring prior to recording. It outputs only when replaying recorded tracks and the speaker switch is set to "on" and there are no headphones plugged in.

I can not get any sound simply when I try to playback a recorded

indraganzo Tue, 12/13/2011 - 04:40

I can not get any sound simply when I try to playback a recorded file , and the switch is on and there are no headphones plugged
do you think i should ask for a return ?

...but the sound is there in the headphones if you plug them in?

Boswell Tue, 12/13/2011 - 04:44

...but the sound is there in the headphones if you plug them in?

i have solved the issue just go input setting and turn monitor o

indraganzo Tue, 12/13/2011 - 04:47

i have solved the issue just go input setting and turn monitor off

Topic Tags

Comments

I have the exact same problem with my tascam dr-100 someone ple

The speaker is muted during recording and monitoring prior to re

I can not get any sound simply when I try to playback a recorded

...but the sound is there in the headphones if you plug them in?

i have solved the issue just go input setting and turn monitor o

User login

Popular content

Today's:

All time:

Last viewed: