I had posted an earlier email regarding connectivity from my Roland XP-60 Sequencer to HDR 24/96. I finally got it connected and was successful in laying down my tracks.

The only problem that I had discovered, that once I did my initial tracks such as Drums, Bass and Piano it recorded fine because it was the initial tracks.

Hello all,

I am trying to setup a MOTU midi express XT in order to have Paris send MTC to control a Korg Triton sequencer. I realize this should probably be very simple, but...

I have followed the Paris instructions in the manual, but am not sure what settings I should use for the Motu, as I can't seem to get it to work. Any help with this would be much appreciated.

In case anyone out there is interested, I got my copy of Sonar yesterday, and had it up and running in no time flat. About 10 hours, lol. had to re-install display drivers and all of my audio drivers as well. I've got my Panasonic DA7 hooked up to the PC via the MOTU 2408mkII using 2 TDIF cards, and midi control is implemented with a USB midisport 2x2.

Very usefull:

Disable ACPI in Windows for AUDIO.

e.g.
noise with ACPI ( Pulsar card )
was by -55dB
noise without ACPI -64dB

Ive read the headlines "slower than p3", ive heard of units removed from store shelves due to glitches. But. I am still curious about this as I see its clock speeds creeping up. Is this really something to be avoided?

Hi Joel,
Thanks for your reply, but is that it? End of conversation, still no official response at SS site except for the press release? The press release seems to make a point of not saying anything. If it's all good news why is it such a secret?
Michael

Hi group,
I'm getting a click during the silence before an audio track begins. Tried altering the buffer size but it made no difference.
I'm running at a sample rate of 44.1k - should I be using 48k?
Setup: Mac G4, VST4.0, MOTU2408

way back in high school my brother used to get Stereo Review, which was my little window/intro into the world of hifi (that and his Nikko amp and smaller Advent loudspeakers)...but i am WAY out of touch with the state of home audio gear these days (still using the old mid-70's Nikko, fer chrissakes).

Hi Dedric,
Thanks to you and numerous others I have finally made the plunge into Paris and I am excited. Just put the order in today. 3.0 looks amazing BTW. Anyway after seeing Paris in action I was impressed to say the least with it's depth and smooth airy quality...But then again we were listening to some of Brian T's work.

My system: Powercomputing Powercenter Pro upgraded with a
Sonnet Crescendo G3 400 MHz processor
256 mb RAM
Virtual Memory OFF
Appletalk OFF
Mac OS 9.0.4
OMS 2.3.8
Minimal extension set.