I need some help, which mics( $1000.00 and under) and what preamp( $500.00 and under) should I use. I'm considering a KSM 44 and and the AT 40's series, and a Gefel. thanks

Would you consider an AT3035 to a RODE NTK a significant upgrade?

It would be mainly be used for hip hop /rap vocals. .

if you don't think so give an opinion to a better one?

all ears.

I am considering the purchase of a Grace Lunatec V3 two channel preamp with A/D converter. I am currently using a Demeter preamp and the Grace would be a very different beast. I am using a TC Gold Channel (which I got for a great price) as my AD converter (24 bits, 48 Khz) and going to an M-box.

I have a 1968 Sohner upright piano in pretty good shape. I am doing some recording with it and I have to mic the piano, something I have never done before. I have two MXL MXLV63M mics and one Shure SM58, recording into PT with the Digi002.

Hi,

I'm about to record a soprano sax soloist in my living-room. The guy playing is a semi-pro and we have the following equipment:

Mics:

• AKG Solidtube
• RODE NT1000
• Matched pair of ADK Vienna Edition
• SM57

Pre:

• dbx 376 tube mic preamp

Interface

Ok I have
a)ART Tube Microphone Preamplifier and
b) AKG Acoustics D880m

Hi All,

I have just about got my home studio to a stage where I can begin doing some good recording, but am still missing a vital link...mics.

I'm prob. going to get a couple of SM57s, but need some help with what other mics will go well, and are not too expensive. (I guess I am aiming at mainly band type recording but also small classical type ensembles as well)

Hi All,

I have just about got my home studio to a stage where I can begin doing some good recording, but am still missing a vital link...mics.

I'm prob. going to get a couple of SM57, but need some help with what other mics will go well, and are not too expensive. (I guess I am aiming at mainly band type recording but also small classical type ensembles as well)

Is it possible to damage a KM184 just by unscrewing the tip? I was searching for the serial number to register my mic, and then screwed it back together. Now the mic seems to be not working. Is this a fluke, or did I possibly damage it by unscrewing the tip? It was working fine before.

Hi all -