ive done a little research and all 3 of these mics claI'm to give the most gain before feedback. i wondered if anyone had had any experience with them and which might actually do the job best and sound good doing it at the same time.
thanks :)

Hey..i'm TOTALLY new to the recording stuff neither did i have a lot of money. So I got the least expensive stuff i could find. I got a MXL 990, Some LiveX XLR cable (5ft), & a Behringer Mic200. I plug that into my Home PC with a standard Sound Card. Anyway, when I started out it sounded great. Ofcourse, since they are really cheap so there was this hiss.

Hey
just curious
slight twist to the what should I use for Micing drums up

what do YOU use to mic drums
Name the lot, over heads, bass drum.. snare ... and please.. please mention how many.. so say how many sm57's you use on the snare :P or how many over heads and where YOU PERSONALLY would place them

Rather interested to see what people do.

hi,there are a few good mics out there that i have tested in mic shops that sound nice such as the Sennheiser E935, E945 Audio-Technica AE6100, AE4100. but i have been wondering what vocal mic might be best for my applications. i have a clean melodic voice but i sing in melodic metal bands that tend to be very loud on stage and in the rehearsal rooms.

hi
can anyone tell me the best setting & expeience for nt2000 ?
( i mean settings on the mic, (3 scroling buttons )

THANKS

Nuendo 3.0.2.632
RME FIREFACE 800

Hi, Im using a Apex 435 condenser mic. when i have a xlr-to-XLR cable connected to the mic to the mixer, the mic works. whenever i connect xlr-to-1/4 phone to the mic then to the mixer, the mic does not work. what can be some problems? phantom power is on so thats ok. anyone have any ideas?

Hello,

I have used cool edit pro for years and had good results when I used a mix on my mics called somthing like "Salvador Mix" or somthing?

but when I had to reformat my computer i lost the steps in creating the mix..

so i was just woundering if anyone knew or could help me find out how to do the "Salvador Mix" on CEP again!

thanks!

Hi there! If you have a song that starts off dead quite say just an acustic guitar and a vocal and slowly builds to a full on rock herdling distorted guitar ending how do you still make the beggining of the track start load, volume wise, without loosing that quiet feeling. Iv heard similar effects on proffesional recording but am unsure of the clever remedy. Does anyone know the secret?

Hello, I am new here and wanted some good advice for a MIcrophone to hook up my upright Piano. I am in a recording school right now but won't be in the good classes for atleast a few more months. I want so start laying down tracks NOW! So I know I probably want a condensor Mic. A good one that will get a good full recording. My budget for a Mic is around $400.

Am I asking too much of this modestly priced mic for sax recording?

And if it is adequate, any suggestions as to placement in relation to sax bell etc? And what about input volume settings ... ride it just short of too far, or keep it way below peak?

DAW set up is Sonar 4 PE with fast computer and 2 large HD's.